ATiTool 0.27 Beta1, Vista, 2900XT

tidyboy21 · 12-17-2007, 07:27 PM

Just wondering, is anyone using ATiTool 0.27 with vista? I tried an earlier version ages ago and ended up doing a clean install. If anyone is using it, are you able to do any voltage mods within the program? Cheers.

[-0MEGA-] · 12-17-2007, 07:54 PM

Why would you use B1? They have 0.27 Beta4 out.

Anyways, I do have 0.27 B4 and I use it under Vista with my 2900XT, however you aren't able to overclock with it (easily I should say). So I use RivaTuner for the actual overclocking, and ATI Tool for the artifact scanning.

As for changing the voltage, I know you can using ATI Tool and the 2900XT because I did it before in XP, however I never noticed an overclocking improvement, but then again I didn't do a whole lot of tweaking with the voltages.

tidyboy21 · 12-17-2007, 08:51 PM

Sorry, I meant to put Beta 4. I just want to see if I can get the core over 900, but don't really want to mess about with any bios mods. So I would be able to change voltages with ATiTool, right?

[-0MEGA-] · 12-17-2007, 10:23 PM

Quote:

Originally Posted by tidyboy21

Sorry, I meant to put Beta 4. I just want to see if I can get the core over 900, but don't really want to mess about with any bios mods. So I would be able to change voltages with ATiTool, right?

I have my doubts about getting over 900, I can't seem to get over 850, and it wasnt until recently that I could get over 828.

ATI Tool does have the option to raise/lower the VCore and Memory voltages (as well as a few others).

tidyboy21 · 12-17-2007, 11:48 PM

Quote:

Originally Posted by [-0MEGA-]

I have my doubts about getting over 900, I can't seem to get over 850, and it wasnt until recently that I could get over 828.

ATI Tool does have the option to raise/lower the VCore and Memory voltages (as well as a few others).

I have had mine up to 876 without going over 60c, managed to run 3dmark but crashed a few seconds before ending. Do you know what the default vcore is for the 2900, I thought it was 1.15 but some people say it's 1.00, any idea?

[-0MEGA-] · 12-18-2007, 12:30 AM

Quote:

Originally Posted by tidyboy21

I have had mine up to 876 without going over 60c, managed to run 3dmark but crashed a few seconds before ending. Do you know what the default vcore is for the 2900, I thought it was 1.15 but some people say it's 1.00, any idea?

The temperature isn't the issue, it's that the GPU isn't stable at those high clock speeds at the stock voltage.

I don't know the stock voltage as I haven't really looked into it before, but I'm sure you can find out on AMD's website.

lovely? · 12-18-2007, 03:26 AM

an overclocking voltage commonly used is 1.43 volts, or thats what many people seem to be using.

tidyboy21 · 12-18-2007, 10:13 AM

Well, I tried it, upping the vcore didn't make much difference at all. I could not even reach 876 which I had before. I think I'm just gona stick with 843/1900. 1.43 volts would have been way to high any way. A few places I looked, people were using 1.5 but that was with liquid nitrogen! Thanks anyway you two. Omega, helpful as always.

[-0MEGA-] · 12-18-2007, 03:20 PM

Quote:

Originally Posted by tidyboy21

Well, I tried it, upping the vcore didn't make much difference at all. I could not even reach 876 which I had before. I think I'm just gona stick with 843/1900. 1.43 volts would have been way to high any way. A few places I looked, people were using 1.5 but that was with liquid nitrogen! Thanks anyway you two. Omega, helpful as always.

You're welcome

I'm not 100% sure that ATI Tool even raises the voltage correctly, because it should allow for a greater overclock. Although it seems like both you and I haven't had any luck with raising the VCore with ATI Tool, so I'm just living with my 842 overclock.

12-17-2007, 07:27 PM	#1 (permalink)
tidyboy21 Gold Member Join Date: Aug 2005 Location: Cornwall, UK Posts: 306	ATiTool 0.27 Beta1, Vista, 2900XT Just wondering, is anyone using ATiTool 0.27 with vista? I tried an earlier version ages ago and ended up doing a clean install. If anyone is using it, are you able to do any voltage mods within the program? Cheers. __________________ ASUS RAMPAGE FORMULA X48 (0407) C2D E8500 @ 4.12GHz T.R.U.E. Black/ 2x Blackfire4 Kameleon's 3GB Crucial Ballistix PC2-6400 @ 966MHz, 4-4-4-12 2 x HD3870's DDR4 Crossfire (875/1250) / TT Duorbs Thermaltake Toughpower W0132 1000w 4 x Western Digital 250GB HDs 2 x LG Flatron 24" Monitors Thermaltake Armor with 25cm Side Fan 3D Mark06 20338 (Vista)

12-17-2007, 07:54 PM	#2 (permalink)
[-0MEGA-] VIP Member Join Date: Nov 2004 Location: Concord, NH Age: 20 Posts: 27,441	Why would you use B1? They have 0.27 Beta4 out. Anyways, I do have 0.27 B4 and I use it under Vista with my 2900XT, however you aren't able to overclock with it (easily I should say). So I use RivaTuner for the actual overclocking, and ATI Tool for the artifact scanning. As for changing the voltage, I know you can using ATI Tool and the 2900XT because I did it before in XP, however I never noticed an overclocking improvement, but then again I didn't do a whole lot of tweaking with the voltages. __________________ Core 2 Quad Q9550 @ 4.1GHz Asus Rampage Formula X48 ATI 4870X2 2GB GDDR5 (800/1900) 4GB (2x 2GB) DDR2 960 (6-6-6-18) 750GB SATAII w/32MB Creative SB X-Fi Titanium Fatal1ty SilverStone 750W +12V@60A 3DMark06: 22605

12-17-2007, 08:51 PM	#3 (permalink)
tidyboy21 Gold Member Join Date: Aug 2005 Location: Cornwall, UK Posts: 306	Sorry, I meant to put Beta 4. I just want to see if I can get the core over 900, but don't really want to mess about with any bios mods. So I would be able to change voltages with ATiTool, right? __________________ ASUS RAMPAGE FORMULA X48 (0407) C2D E8500 @ 4.12GHz T.R.U.E. Black/ 2x Blackfire4 Kameleon's 3GB Crucial Ballistix PC2-6400 @ 966MHz, 4-4-4-12 2 x HD3870's DDR4 Crossfire (875/1250) / TT Duorbs Thermaltake Toughpower W0132 1000w 4 x Western Digital 250GB HDs 2 x LG Flatron 24" Monitors Thermaltake Armor with 25cm Side Fan 3D Mark06 20338 (Vista)

12-18-2007, 03:26 AM	#7 (permalink)
lovely? Diamond Member Join Date: Jun 2006 Location: California Age: 16 Posts: 4,060	an overclocking voltage commonly used is 1.43 volts, or thats what many people seem to be using. __________________ E8400 @ 3.7GHZ ASUS P5K-DELUXE 4GB OCZ Reaper CL3 @ 800MHZ 3-4-4-15 eVGA 8800GT COMING: ATI 4850 OZC GameXStream 700W PSU 320GB WD Caviar SATA, 80GB WD Caviar IDE

12-18-2007, 10:13 AM	#8 (permalink)
tidyboy21 Gold Member Join Date: Aug 2005 Location: Cornwall, UK Posts: 306	Well, I tried it, upping the vcore didn't make much difference at all. I could not even reach 876 which I had before. I think I'm just gona stick with 843/1900. 1.43 volts would have been way to high any way. A few places I looked, people were using 1.5 but that was with liquid nitrogen! Thanks anyway you two. Omega, helpful as always. __________________ ASUS RAMPAGE FORMULA X48 (0407) C2D E8500 @ 4.12GHz T.R.U.E. Black/ 2x Blackfire4 Kameleon's 3GB Crucial Ballistix PC2-6400 @ 966MHz, 4-4-4-12 2 x HD3870's DDR4 Crossfire (875/1250) / TT Duorbs Thermaltake Toughpower W0132 1000w 4 x Western Digital 250GB HDs 2 x LG Flatron 24" Monitors Thermaltake Armor with 25cm Side Fan 3D Mark06 20338 (Vista)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Vista Software Compatibility	The Astroman	General Software	61	04-22-2008 05:30 PM
which windows vista package to get	robina_80	Operating Systems	39	03-17-2008 03:39 AM
[urgent]Help! Vista Aero malfunctioned after installed XP!	aleyshark	Operating Systems	2	11-17-2007 08:00 PM