|
|
#1 (permalink) |
|
Bronze Member
![]() Join Date: Dec 2007
Posts: 65
|
I'm trying to remove my hard and what i did was first unistalled it from the device manager then shut it down tried to turn it on and it won't work. I get a message saying stike F1 to retry reboot. now if i put it back in it works....what am i doing wrong.
![]() i wanted to make it and exturnal so thats why i'm removing it. |
|
|
|
|
|
#2 (permalink) |
|
Diamond Member
![]() Join Date: Sep 2007
Location: EHT, NJ
Posts: 2,547
|
You don't need to uninstall it from the Device Manager. When removing a physical interior component, just make sure the power is off, then remove the item from the case. In the case of a HDD, unplug both the power and data cables from the drive, remove and screws holding it in place, and pull out the unit. Installing a new one is the same procedure, only in reverse.
Will you have an internal HDD and external HDD? Some systems are quirky with recognizing Operating Systems unless the drive is internal. If you plan on having a drive containing an OS inside the computer and using the external drive for storage, you should be fine.
__________________
--Jay Gigabyte EP31-DS3L | E4500 | Masscool HSF paired with AS-5 80 GB SATA2 x 2 | e-GeForce 7100 GS | CM Elite 330 (gorgeous!) Triple Boot: Ubuntu 7.10/XP Home/Kubuntu 7.10 You do realize that everytime PC eye Posts, God kicks a puppy, and every time someone takes his advice, He smothers a kitten in front of a child, right? http://www.computerforum.com/114761-...tml#post922619 |
|
|
|
|
|
#3 (permalink) |
|
Bronze Member
![]() Join Date: Dec 2007
Posts: 65
|
Imsati that didn't work when i pull it out and try to turn it on it hangs at the bios and then beeps twice and says primary hard disk drive O not found, strike F1 to retry reboot, F2 to run setup utility
And this is not the HDD with my OS on it it just has my music Last edited by Ineedmoney$; 01-13-2008 at 09:33 PM. |
|
|
|
|
|
#4 (permalink) | |
|
Platinum Member
![]() Join Date: Sep 2005
Location: IL, USA
Age: 38
Posts: 796
|
Quote:
__________________
Motherboard - Asus P5B-E CPU - E6600 Memory - 2GB Corsair XMS2 (2x 1gb) Graphics - x1650 pro 256mb Hard Drives - 250GB WD and 250GB Samsung in Raid 1 DVD Drive - Lite-On DVD Burner - Lite-On Power Supply - Ultra 425 watt - upgrading to at least 550-600 Watt 22" Acer widescreen AL2216WBD |
|
|
|
|
|
|
#5 (permalink) |
|
Bronze Member
![]() Join Date: Dec 2007
Posts: 65
|
how do i make it bootable it has windows on it and the bios opitions are Auto or off
do i need to get some sort of drivers so that the bios will reconize it even though it loads up fine if i put that one back in In the bios the 1 with my OS says that it is unknown device and when i put my other one in it says hard drive Last edited by Ineedmoney$; 01-13-2008 at 10:03 PM. |
|
|
|
|
|
#7 (permalink) |
|
Bronze Member
![]() Join Date: Jan 2008
Posts: 30
|
not sure if this will help, but I know on "some" multi-hdd setups, it may be jumpered to slave/master. Make sure the OS hdd is jumpered to master...
__________________
Dell XPS gen 5 P4-D 3.6Ghz ATI radeon X850X PE WD 80 gig @ 10K etc, etc, etc... New custom build coming VERY soon :) |
|
|
|
|
|
#8 (permalink) |
|
Moderator
![]() Join Date: Dec 2004
Location: Canada
Age: 24
Posts: 10,103
|
What kind of hard drive do you have? Is it SATA?
__________________
You know what the chain of command is? It's the chain I go get and beat you with 'til ya understand who's in ruttin' command here. I must plug a couple comics because they are good :D: www.ctrlaltdel-online.com www.userfriendly.org |
|
|
|