|
|
#12 (permalink) |
|
Gold Member
![]() Join Date: Apr 2008
Location: Netherlands
Age: 18
Posts: 289
|
Well, they managed 510 over here, they also have the setup on how they installed the Voltages etc, but these guys only get close to 450. The first one pump the voltages to:
CPU VTT: 1.35v NB Core/SB Core: 1.6v HT: 1.5v DDR-2 voltage at 2.45v And the second guys that pushed 450 had this: VCore - 1.5125V Memory Voltage - 2.4V HT Voltage - 1.25V NB Core Voltage - 1.45V SB Core Voltage - 1.60V CPU VTT Voltage - 1.35V So push up everything a bit and Overclock your memory while your at it, do not. Try not to lower the latency of the Ram this will end up in lower overclock most likely. But however, before you begin doing all this make sure you do not have the same problem as: http://www.xbitlabs.com/articles/mai...extreme_8.html , I advise you to read everything below the picture that states the voltages.
__________________
Ordered and in the making (the current one isn't worthy to be mentioned): Mobo: XFX 680i LT Sli CPU: Q6600 Vcard: 8800GTS G92 RAM: DDR2 800Mhz CL5 (OCZ) CPU Cooler: Scythe Infinity Vcard Cooler(s): Arctic Cooling Accelero S1 Rev2 PSU: Corsair 650TX |
|
|
|
|
|
#13 (permalink) |
|
Silver Member
![]() Join Date: Nov 2006
Age: 22
Posts: 120
|
I have decided to go with the " EVGA 132-CK-NF78-A1 LGA 775 NVIDIA nForce 780i SLI ATX Intel Motherboard - Retail " (Link: http://www.newegg.com/Product/Produc...82E16813188024 ). However when I was deciding on memory I was unsure on what the timing should be :S 5-5-5-15 sound right? If any 1 has this board feel free to post your desktop memory spec's. Also I read about the XFX 780i and on newegg it says " DDR2 800 (up to DDR2 1200 with EPP 1.0) " Now what exactly is a EPP 1.0 and would this be compatible with the board I am looking into?
(Edit: Is it the Voltage I should be worried about? Or the timing :S) Thanks for the continued help, 512
__________________
-*-Acrylic Case -*-GIGABYTE GA-965P-DS3 LGA -*-Intel Core 2 Duo E6300 Conroe 1.86GHz -*-32" Widescreen LCD Display -*-G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 -*-WD 160GB 7200 RPM 16MB Cache SATA 3.0Gb/s -*-XFX GeForce 7900GS ( XT Edition ) -*-PLEXTOR Black 16X -*-XCLIO GOODPOWER 500W ATX Last edited by 512mb; 05-11-2008 at 03:49 PM. Reason: :S |
|
|
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mobo Heatsink trouble | mtb211 | Motherboards | 1 | 01-11-2007 06:33 AM |
| Can this Mobo support Pentium D and SLI? | BenDid | Motherboards | 4 | 09-11-2006 03:10 PM |
| choosing the best mobo! | pope | Motherboards | 10 | 09-11-2006 02:02 AM |
| SLI mobo | diroga | Motherboards | 8 | 04-02-2006 10:47 PM |
| Help choosing 939 mobo | Bunchofstuff | Motherboards | 6 | 06-16-2005 10:02 PM |