polygono

I guys I have major problems with my new set up. I am not able to install windows XP.

The system hangs after starting the second part of installation of windows XP (the time of crash is not the same. I notice that the main time that it hangs more than others is after the first part (copying file to HDD) of the Windows XP installation when the PC must restart and boot for the first time from windows and hangs with black screen of death.

I have done a min hardware install with just SATA DVD and HDD, Single stick 2GB ram and graphics card and still hangs with black screen of death

I put IDE CD ROM and IDE Hard drive and also hangs (fully working on other PC). Also used 3 copy of XP that are fully test on other PC and working fine. Also have change the RAM Stick to different ram and still no change.

I have run Memtest86 memory test both stick all test passed. BIOS also detects all components

I have not tested the GPU to any other machine. Do MSI have any issue with XFX hardware?

Now what is left is my GPU motherboard and CPU.

So is it possible the GPU to run and crash half way?

Can the CPU coz a problem? As far I know if the CPU is not functioning PC will not start at all on an anther forum some else had similar problem with an EVGA board and it was the motherboard.

Any ideas welcome coz I am running out of ideas here.

I am not able to change the setting in the Bios for the memory all are lock into auto? Any ideas?

my set up is

1 x Enermax Infiniti 720W PSU silent and Cool 13.5cm Fan
1 x Western Digital WD5000AAKS 500GB SATA II 7200RPM 16MB Cache - OEM
1 x Pioneer DVR-215BK 20X SATA DVD±RW DL Ram Int Black - OEM
1 x OCZ Freeze Extreme Thermal Conductivity Compound 3gram syringe
1 x Cooler Master Sphere 100% Copper with 4 Heatpipes Processor Cooler
1 x XFX 9800GTX Extreme XT Edition 512MB GDDR3 Dual DVI HDCP HDTV Out PCI-E Graphics Card
1 x Intel Core 2 Quad Q9300 2.5GHz 1333FSB 6MB L2 Cache OEM Processor
1 x Antec 1200 Twelve Hundred Full Tower Case - No PSU
1 x MSI P7N Diamond nForce 780i SLI Socket 775 8 channel X-Fi Xtreme Audio ATX Motherboard
1 x OCZ 4GB Kit (2x2GB) 800MHz/PC2-6400 Memory Platinum Performance CL5 (5-4-4-18)

Please help

King Regards
polygono

mrjack

According to MSI's homepage the following components should have no trouble working:
- CPU
- RAM
- HDD

Can't find info on compatibility concerning other items in your list.

I'm not sure and I hope someone else can say if it'll work but how about installing XP on the HDD on another computer and then installing the HDD in the new computer? I don't see why it should cause trouble as long as drivers aren't installed. However this may be crazy talk and I take no responsibility if you decide to test this and it ends bad.

Just a thought, are you installing XP with SP2 integrated? And how have you partitioned the HDD? Just came to think of the fact that you can't use a partition bigger than 137Gb or something like that with XP unless you have SP2 installed. I doubt it would cause this kind of issue but just to be safe.

__________________

Main rig:
Intel Core 2 Duo E7200 @ 3GHz | MSI P7N Zilent
2x2048Mb OCZ Titanium 800MHz DDR2
Samsung Spinpoint T166 320Gb SATAII
Seagate Barracuda 7200.10 250Gb SATAII
Western Digital Caviar 500Gb SATAII
MSI NX8800GT OC 512Mb @ 660MHz/950MHz
Creative Sound Blaster X-Fi Xtreme Audio | Antec Truepower Trio 550W