Quote:
|
Originally Posted by Praetor
I can say that your card isnt overheating or downthrottling ... so there goes that hypothesis (i assume you let the hardware monitoring run while you played B&W2)
|
Yes, I did. I started off from the desktop, then opened up B&W2 and loaded from where I was playing.[/quote]
Quote:
If there is no typo here then that would suggest that your CPU is running at <700Mhz.... which would also suggest that you have Cool'n'Quiet enabled? (i was expecting your divider to be something like ... im guessing it was 1/14? Cuz that would be the correct divider.
|
No, I don't think I have Cool'n'Quiet enabled.
Another mistake
it was CPU/14
Quote:
Now I do have a suggestion to try ...
1. Remove the memory stick in DIMM2 (it's the Kingston stick ... the one that is PC2700)
2. Repeat what i suggested here but set it to 400
3. The value you posted here should now say Frequency = 200, FSB-DRAM = CPU/11
Now if that works as i hope/expect then we can move on  (yes without that 512MB stick of RAM .. for now at least)
|
Ok, I removed the Kingston stick and changed the Memclock Value to 400.
But the Frequency is still 157.9 MHZ and the FSB-DRAM is still CPU/14
I'm positive I removed the correct one, here's the registry dump to confirm:
Code:
Memory SPD
------------------------------------------------------------------------------
DIMM #1
General
Memory type DDR-SDRAM
Manufacturer (ID) (0000000000000000)
Size 512 MBytes
Max bandwidth PC3200 (200 MHz)
Part number
Manufacturing date Week 00/Year 00
Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
Timings table
Frequency (MHz) 200
CAS# 2.5
RAS# to CAS# delay 3
RAS# Precharge 3
TRAS# 8
DIMM #3
General
Memory type DDR-SDRAM
Manufacturer (ID) (0000000000000000)
Size 512 MBytes
Max bandwidth PC3200 (200 MHz)
Part number
Manufacturing date Week 00/Year 00
Attributes
Number of banks 2
Data width 64 bits
Correction None
Registered no
Buffered no
Timings table
Frequency (MHz) 200
CAS# 2.5
RAS# to CAS# delay 3
RAS# Precharge 3
TRAS# 8
I had fraps running when I did the previous test. Not recording just showing the FPS. It was an average of 7.
Quote:
2. Download 3dmark and run all the test and tell me all your scores.
http://www.futuremark.com/download/?3dmark05.shtml
Also hit detail in 3dmark and give me a copy of the page that is display with all your computer information and video card information.
|
I'll do this later. I have things running that I can't stop ATM, so it would probably interfere.