I Need An Expert

jimkiker · 09-06-2005, 04:43 PM

I NEED YOUR HELP!!!!
GUYS,to start with... I own a i845wn Mobo,a socket 478 fsb 400 1.7 ghz intel p4 proc.,an ati 9200se 128 mb graphics card and stuff like this ..
One day i realised that my system was crap,so i wanted to buy a new mobo supports agp8 and ddr 400 ram memory and of course my proc. So, i bought
9PJL Apogee Chaintech mobo (http://www.chaintechusa.com/tw/eng/p...3&PISNo=159).I Bought a used one cause i wasnt able to find a new one.The person sold it to me was a known and the mobo was workin perfect 100% When i set it up the pc was able to start ( i mean that the processor fan started workin but i couldnt hear the "Beep" from the mobo speaker.I realised that the monitor was not startin.i checked the connections and everything was perfect..Just the monitor was not startin.. I went to my neighboorhoods pc shop and they checked that..The said that mobo was not workin and it was Dead..I sold it back to the guy and he set it up to a pc he had and it just .. WORKED... He gave me another mobo then the: Chaintech 9CJS (http://www.chaintechusa.com/tw/eng/p...o=13&PISNo=144) I set it up and just the same...Any ideas??
1) The mobos work thats sure..
2) My " set up " work is probably good cause they checked it from the pc shop..
3) I dont wanna give back again this mobo.. PLZ HELP.. I need an expert..The monitor stays off ... and the speaker does no voice..Just the proccesor fan starts..

Jimmy

jimkiker · 09-06-2005, 04:50 PM

I Forgot, The ram memory i use at the new system is a TWINMOS 512 DDR 400 PC 3200 (CL 2.5)

mrjack · 09-06-2005, 05:01 PM

You sure you connected everything? Oh and if there are those fancy diagnostic leds you should check out how they're lit, they usually have about 1-2 pages about those in the manual. For example, on my mobo I have 4 leds. If they are all red the CPU is busted or not correctly installed, 3 red and 1 green means in my case that there is a problem with the memory etc.

lynx6200 · 09-06-2005, 05:05 PM

Follow what mrjack said, and also try booting without your ram installed, and any other devices that are not critical. It could be a problem wiht the psu or video card.

**Archangel** · 09-06-2005, 05:08 PM

id it actually do anything? you should check on the internet on the compartibility list of the mobo, if that mobo does support you CPU.
i mean.. my old K7T-Turbo Limited Edition board could support only till the AMD palomino core.. the other CPU (barton and those cores) wernt supported, so the mobo acted as if there was no CPU insterted at all..

If you cant find that list/table, try fireing op your system without CPU in the socket.
my quess is , that it still does the same (Fans start running, but monitor stays black

Rick G · 09-06-2005, 10:11 PM

You don't say what PSU you have. You are going from a low power system to a higher power system and the psu may not be up to the task. Your cpu should be fine with the new board and the memory as well.
Try a barebones boot with only the mobo, cpu, memory, psu, hdd and vid crd.
Reset you cmos using the jumper to clear. check to see if the cmos jumper is in the correct position as the clear position will give the same results as you descibe.

**Praetor** · 09-18-2005, 07:31 PM

Quote:

Follow what mrjack said, and also try booting without your ram installed, and any other devices that are not critical.

I hope yer not suggesting RAM isnt critical to the boot process

Quote:

Follow what mrjack said, and also try booting without your ram installed, and any other devices that are not critical.

Yep, the fans are kicked in by power

Quote:

Try a barebones boot with only the mobo, cpu, memory, psu, hdd and vid crd.

HDD isnt a core boot requiement

Vampiric Rouge · 09-20-2005, 05:37 AM

Well the no video could be your
A:Bad video card/ not pushed in all the way
B:Bad Ram/not pushed in all the way
C:Weak PSU(PLZ tell us the specs on the PSU(PSU= Powersupply unit))

I would check these first. If you don't have enought power video is one of the first to go. If you have no ram or it's not in all the way you'll have no video and if you video card is dead you'll have no video.

09-06-2005, 04:43 PM	#1 (permalink)
jimkiker New Member Join Date: Sep 2005 Location: Thessaloniki ,Greece Posts: 23	I Need An Expert I NEED YOUR HELP!!!! GUYS,to start with... I own a i845wn Mobo,a socket 478 fsb 400 1.7 ghz intel p4 proc.,an ati 9200se 128 mb graphics card and stuff like this .. One day i realised that my system was crap,so i wanted to buy a new mobo supports agp8 and ddr 400 ram memory and of course my proc. So, i bought 9PJL Apogee Chaintech mobo (http://www.chaintechusa.com/tw/eng/p...3&PISNo=159).I Bought a used one cause i wasnt able to find a new one.The person sold it to me was a known and the mobo was workin perfect 100% When i set it up the pc was able to start ( i mean that the processor fan started workin but i couldnt hear the "Beep" from the mobo speaker.I realised that the monitor was not startin.i checked the connections and everything was perfect..Just the monitor was not startin.. I went to my neighboorhoods pc shop and they checked that..The said that mobo was not workin and it was Dead..I sold it back to the guy and he set it up to a pc he had and it just .. WORKED... He gave me another mobo then the: Chaintech 9CJS (http://www.chaintechusa.com/tw/eng/p...o=13&PISNo=144) I set it up and just the same...Any ideas?? 1) The mobos work thats sure.. 2) My " set up " work is probably good cause they checked it from the pc shop.. 3) I dont wanna give back again this mobo.. PLZ HELP.. I need an expert..The monitor stays off ... and the speaker does no voice..Just the proccesor fan starts.. Jimmy

09-06-2005, 05:01 PM	#3 (permalink)
mrjack VIP Member Join Date: Jul 2005 Location: Finland Age: 17 Posts: 2,372	You sure you connected everything? Oh and if there are those fancy diagnostic leds you should check out how they're lit, they usually have about 1-2 pages about those in the manual. For example, on my mobo I have 4 leds. If they are all red the CPU is busted or not correctly installed, 3 red and 1 green means in my case that there is a problem with the memory etc. __________________ Main rig: Intel Core 2 Duo E7200 @ 3GHz \| MSI P7N Zilent 2x2048Mb OCZ Titanium 800MHz DDR2 Samsung Spinpoint T166 320Gb SATAII Seagate Barracuda 7200.10 250Gb SATAII Western Digital Caviar 500Gb SATAII MSI NX8800GT OC 512Mb @ 660MHz/950MHz Creative Sound Blaster X-Fi Xtreme Audio \| Antec Truepower Trio 550W

09-06-2005, 05:05 PM	#4 (permalink)
lynx6200 Platinum Member Join Date: Mar 2005 Location: NC Age: 26 Posts: 791	Follow what mrjack said, and also try booting without your ram installed, and any other devices that are not critical. It could be a problem wiht the psu or video card. __________________ [size=2][size=1][color=DarkGreen][color=Navy] CoolerMaster Case Asus A8N SLI- Deluxe AMD athlon 64 3400+ 1GB Ultra DDR ram XFX 7600 GT 256mb videe 230GB SATA HD Combo drive

09-06-2005, 05:08 PM	#5 (permalink)
Archangel Moderator Join Date: Jan 2005 Location: Netherlands Age: 21 Posts: 8,281	id it actually do anything? you should check on the internet on the compartibility list of the mobo, if that mobo does support you CPU. i mean.. my old K7T-Turbo Limited Edition board could support only till the AMD palomino core.. the other CPU (barton and those cores) wernt supported, so the mobo acted as if there was no CPU insterted at all.. If you cant find that list/table, try fireing op your system without CPU in the socket. my quess is , that it still does the same (Fans start running, but monitor stays black __________________ Newton is dead, Einstein is dead, I don't feel very well either Xfire - Mirrari Intel Q6600 ( @3.6GHz) Asus Triton 79 Amazing 549/3200 4x 1Gb Corsair XMS2 DDR800 Asus Maximus Formula Asus & Sapphire HD3870 512Mb ( 850/1180 ) Corsair HX620W PSU

09-06-2005, 10:11 PM	#6 (permalink)
Rick G Gold Member Join Date: Jan 2004 Location: Las Vegas, USA Posts: 294	You don't say what PSU you have. You are going from a low power system to a higher power system and the psu may not be up to the task. Your cpu should be fine with the new board and the memory as well. Try a barebones boot with only the mobo, cpu, memory, psu, hdd and vid crd. Reset you cmos using the jumper to clear. check to see if the cmos jumper is in the correct position as the clear position will give the same results as you descibe. __________________ New Sys Abit AW9D Max OCZ Plat @ x 1gig OCZ Gamextreme 600 PSU 8800 GTS 640 sony dvd burner WD 200 gig sata hdd Thermaltake shark case Viewsonic 22" widescreen

09-06-2005, 04:50 PM	#2 (permalink)
jimkiker New Member Join Date: Sep 2005 Location: Thessaloniki ,Greece Posts: 23	I Forgot, The ram memory i use at the new system is a TWINMOS 512 DDR 400 PC 3200 (CL 2.5)

09-20-2005, 05:37 AM	#8 (permalink)
Vampiric Rouge Platinum Member Join Date: Aug 2005 Location: Philadelphia, Pa Age: 21 Posts: 625	Well the no video could be your A:Bad video card/ not pushed in all the way B:Bad Ram/not pushed in all the way C:Weak PSU(PLZ tell us the specs on the PSU(PSU= Powersupply unit)) I would check these first. If you don't have enought power video is one of the first to go. If you have no ram or it's not in all the way you'll have no video and if you video card is dead you'll have no video. __________________ MAIN PC: Intel G965 Express ATX Intel Motherboard\ Intel Core 2 Quad E6700\4gigs of samsung ddr2 ram @ 667\Antec neo 480watt power supply\Nvidia GeForce 7950 gt\400 gigs of Seagate Barracuda 7200, 750 gigs of Western Digital Caviar and 320 gigs of Maxtor\Benq FP202W 20.1" 8ms Widescreen LCD\ RAZOR copperhead\ flexglow gaming mousepad Laptop:ASUS Eee PC 8G - Galaxy Black

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode