a few settings from the bios setup

kof2000 · 09-20-2004, 01:34 PM

should these be enable or disable and when?

config dram by speed enable disable or auto

auto detect dimm/pci clk enalble or disable

spread spectrum enable or disable

jesbax · 09-20-2004, 05:06 PM

[/quote]config dram by speed enable disable or auto[/quote]
auto

[/quote]auto detect dimm/pci clk enalble or disable[/quote]
enable

[/quote]spread spectrum enable or disable[/quote]
enable

kof2000 · 09-20-2004, 09:41 PM

can you tell what they do first lol?

4W4K3 · 09-21-2004, 01:22 AM

it all depends on your computer. no one can tell you unless you tell us exactly what hardware you have, if its overclocked, stock, underclocked or anything. just for refrence though, if you want stock you need to have "dram by speed" enabled, you need "auto detect pci" enabled if you have onboard or PCI card. if you are using AGP then there should be an AGP option unless your board is old and has no AGP slot. and finally "spread spectrum" should be disabled in almost all cases. im not saying those will work...but generally with a normal machine that does work. try it out and see if you want, but i'd consult your manual first.

09-20-2004, 01:34 PM	#1 (permalink)
kof2000 Diamond Member Join Date: Aug 2004 Location: Oahu Age: 27 Posts: 6,273	a few settings from the bios setup should these be enable or disable and when? config dram by speed enable disable or auto auto detect dimm/pci clk enalble or disable spread spectrum enable or disable __________________ QX9650@4.2 swiftech \|9600@3.0 9700 nt 780i \| 790fx 8gb ddr1200 \| 8gb ddr1200 2x150gb 3x1tb \|2x250gb 3x8800gtx \|3x2900xt 1gb 2x20xdvdrw \|2x20xdvdrw 15in1 card reader \|15in1 card reader ng15/g9 \|ng15/g9 1200w psu \|1200w psu 2x28" LCD \|2x28" LCD

09-20-2004, 05:06 PM	#2 (permalink)
jesbax Gold Member Join Date: Sep 2004 Location: NE Age: 29 Posts: 337	[/quote]config dram by speed enable disable or auto[/quote] auto [/quote]auto detect dimm/pci clk enalble or disable[/quote] enable [/quote]spread spectrum enable or disable[/quote] enable __________________ my spelling sucks bad so bear with me. The Rig--(upgraded) amd athlon 64 x2 4800+ 4gb ram 300 gb hdd x2(raid) 80 gb hdd x2(raid) 52x cd-rw 16x dvd+rw dl ati Radeon 9550 256 mb

09-20-2004, 09:41 PM	#3 (permalink)
kof2000 Diamond Member Join Date: Aug 2004 Location: Oahu Age: 27 Posts: 6,273	can you tell what they do first lol? __________________ QX9650@4.2 swiftech \|9600@3.0 9700 nt 780i \| 790fx 8gb ddr1200 \| 8gb ddr1200 2x150gb 3x1tb \|2x250gb 3x8800gtx \|3x2900xt 1gb 2x20xdvdrw \|2x20xdvdrw 15in1 card reader \|15in1 card reader ng15/g9 \|ng15/g9 1200w psu \|1200w psu 2x28" LCD \|2x28" LCD

09-21-2004, 01:22 AM	#4 (permalink)
4W4K3 VIP Member Join Date: Jul 2004 Location: Lewisville, TX Age: 20 Posts: 6,892	it all depends on your computer. no one can tell you unless you tell us exactly what hardware you have, if its overclocked, stock, underclocked or anything. just for refrence though, if you want stock you need to have "dram by speed" enabled, you need "auto detect pci" enabled if you have onboard or PCI card. if you are using AGP then there should be an AGP option unless your board is old and has no AGP slot. and finally "spread spectrum" should be disabled in almost all cases. im not saying those will work...but generally with a normal machine that does work. try it out and see if you want, but i'd consult your manual first. __________________ My Computer I choose to believe what I was programmed to believe. Can I eat your brain? FOLDING FOR THE GOOD OF MANKIND :F@H Team 44358

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode