Problems adding a DVD ROM

philives · 01-15-2006, 03:08 PM

I have just bought a new DVD rom to play DVDs on my PC, however once I had connected it up (i.e. plugged in the IDE cables) it wasn't recognised. Worse still the CD re writer that was previously working didn't show either.

I unplugged the IDE cable and connected it only to the DVD rom, and it worked fine, the CD Rom also worked fine when connected by itself.

It appears there is some sort of conflict between them, any ideas why this may be???

Thanks in advance for your help

philives · 01-15-2006, 03:26 PM

I forgot to say I have also bought a new IDE cable which when connected doesnt recognise any of the drives when connected, it wont even boot into windows.

**dragon2309** · 01-15-2006, 03:51 PM

Well, my first thought is that the actual cable is dead, i simple snapped wire inside will stop the whole thing from working, the second thing that i thought of is the master/slave jumpers, you may be connecting a master drive on the slave channel and not changing the jumper setting, check it out before replacing anything.

philives · 01-16-2006, 01:39 PM

thanks for your help, it was the master / slave jumper setting, both were on master [doh], thanks for your help

01-15-2006, 03:08 PM	#1 (permalink)
philives New Member Join Date: Jan 2006 Posts: 3	Problems adding a DVD ROM I have just bought a new DVD rom to play DVDs on my PC, however once I had connected it up (i.e. plugged in the IDE cables) it wasn't recognised. Worse still the CD re writer that was previously working didn't show either. I unplugged the IDE cable and connected it only to the DVD rom, and it worked fine, the CD Rom also worked fine when connected by itself. It appears there is some sort of conflict between them, any ideas why this may be??? Thanks in advance for your help

01-15-2006, 03:51 PM	#3 (permalink)
dragon2309 P.I Dragon Join Date: May 2005 Location: KENT, UK Age: 20 Posts: 8,425	Well, my first thought is that the actual cable is dead, i simple snapped wire inside will stop the whole thing from working, the second thing that i thought of is the master/slave jumpers, you may be connecting a master drive on the slave channel and not changing the jumper setting, check it out before replacing anything. __________________ Intel Core2Duo E6600 @ 3.1Ghz - (__CPU__) eVGA 680i SLi - (__MOB__) 4Gb Corsair Dominator DDR2-800 (4x1024Mb) - (__RAM__) 250Gb Western Digital SATAII 7200rpm - (__HDD__) nVidia BFG 8800GTS OC 320Mb - (__GFX__) LG DVD+/-RW 18x DVD-RAM - (__OPT__) Triple Boot - [XP Pro] + [Vista Ultimate] + [Ubuntu 7.10] - (__OS__) [3DMARK'03 :: 25,587] --- [3DMARK'05 :: 13,989] --- [3DMARK'06 :: 8791] - (__BENCHMARKS__) dragon2309.co.uk - a little slice of geek

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-15-2006, 03:26 PM	#2 (permalink)
philives New Member Join Date: Jan 2006 Posts: 3	I forgot to say I have also bought a new IDE cable which when connected doesnt recognise any of the drives when connected, it wont even boot into windows.

01-16-2006, 01:39 PM	#4 (permalink)
philives New Member Join Date: Jan 2006 Posts: 3	thanks for your help, it was the master / slave jumper setting, both were on master [doh], thanks for your help