sata /ide

meanman · 02-02-2006, 07:20 PM

hi i have got a sata drive as master and a ide drive as slave i have tried to back up my master drive (sata) to my slave (ide) using norton ghost 9 and it wont after a few seconds norton ghost stops the pc goes to a blue screen and says shut down to protect windows please remove any new hardware or press restart . please help

[-0MEGA-] · 02-02-2006, 07:22 PM

Because its a different drive. Norton ghost can only be used if the image is being used on the same hardware as it was created on.

So if you make an image from the sata, it can only be installed on the sata.

meanman · 02-02-2006, 07:25 PM

if i buy one off them ide to sata converters will that work

[-0MEGA-] · 02-02-2006, 07:27 PM

Quote:

Originally Posted by meanman

if i buy one off them ide to sata converters will that work

I highly doubt it since its not the same drive type.

And even if it did work, if your putting it in another machine with different hardware, then it wouldnt work.

meanman · 02-02-2006, 07:32 PM

i got norton to back up my sata drive to an external ide hard drive but norton wont find the drive on boot up to restore the image is my only choice to buy another sata drive if so would it have to be the same as the other sata drive ie size and make

[-0MEGA-] · 02-02-2006, 07:37 PM

Because Norton doesnt load USB/FireWire drivers for the external drive. And if you got an identical drive, you will be able to restore the image to it, but if the physical hardware is different on both the machines, then it wont work.

meanman · 02-02-2006, 07:42 PM

the sata and the ide drives are both on the same pc

crossface · 02-20-2006, 02:56 AM

Cloning from one interface to another i.e. pata to sata (both are IDE drives)on the same computer or not is easy to do. I use EZ GIG II software. Put your cd in the a drive and boot from that cd drive, select your source drive and then you target drive. Care should be taken that you dont end up with drive letter assigned by windows. Change your boot priority in windows unplug your pata and boot off sata. That way your sata will be drive c: As long as your target drive is as large or larger than the source drive you will have no problems.

02-02-2006, 07:20 PM	#1 (permalink)
meanman Diamond Member Join Date: Nov 2005 Location: england Posts: 1,864	sata /ide hi i have got a sata drive as master and a ide drive as slave i have tried to back up my master drive (sata) to my slave (ide) using norton ghost 9 and it wont after a few seconds norton ghost stops the pc goes to a blue screen and says shut down to protect windows please remove any new hardware or press restart . please help

02-02-2006, 07:22 PM	#2 (permalink)
[-0MEGA-] VIP Member Join Date: Nov 2004 Location: Goffstown, NH Age: 21 Posts: 28,951	Because its a different drive. Norton ghost can only be used if the image is being used on the same hardware as it was created on. So if you make an image from the sata, it can only be installed on the sata. __________________ Core 2 Quad Q9550 @ 4.1GHz Asus Rampage Formula X48 ATI 4870 X2 2GB GDDR5 4GB (2x2GB) DDR2 960 300GB Raptor // 2x 750GB Creative SB X-Fi Titanium Fatal1ty SilverStone 750W +12V@60A 3DMark06: 22605 www.photosbygeoff.com

02-02-2006, 07:25 PM	#3 (permalink)
meanman Diamond Member Join Date: Nov 2005 Location: england Posts: 1,864	hi if i buy one off them ide to sata converters will that work

02-02-2006, 07:32 PM	#5 (permalink)
meanman Diamond Member Join Date: Nov 2005 Location: england Posts: 1,864	hi i got norton to back up my sata drive to an external ide hard drive but norton wont find the drive on boot up to restore the image is my only choice to buy another sata drive if so would it have to be the same as the other sata drive ie size and make

02-02-2006, 07:37 PM	#6 (permalink)
[-0MEGA-] VIP Member Join Date: Nov 2004 Location: Goffstown, NH Age: 21 Posts: 28,951	Because Norton doesnt load USB/FireWire drivers for the external drive. And if you got an identical drive, you will be able to restore the image to it, but if the physical hardware is different on both the machines, then it wont work. __________________ Core 2 Quad Q9550 @ 4.1GHz Asus Rampage Formula X48 ATI 4870 X2 2GB GDDR5 4GB (2x2GB) DDR2 960 300GB Raptor // 2x 750GB Creative SB X-Fi Titanium Fatal1ty SilverStone 750W +12V@60A 3DMark06: 22605 www.photosbygeoff.com

02-02-2006, 07:42 PM	#7 (permalink)
meanman Diamond Member Join Date: Nov 2005 Location: england Posts: 1,864	hi again the sata and the ide drives are both on the same pc

02-20-2006, 02:56 AM	#8 (permalink)
crossface New Member Join Date: Feb 2006 Posts: 9	Cloning from one interface to another i.e. pata to sata (both are IDE drives)on the same computer or not is easy to do. I use EZ GIG II software. Put your cd in the a drive and boot from that cd drive, select your source drive and then you target drive. Care should be taken that you dont end up with drive letter assigned by windows. Change your boot priority in windows unplug your pata and boot off sata. That way your sata will be drive c: As long as your target drive is as large or larger than the source drive you will have no problems.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode