sata does not work with my old hd's

Beregon · 10-15-2004, 11:30 PM

I just purchased a new Sata drive from seagate. in adition to the seagate, i have 2 cdroms and 2 WD 150 Gb harddrives. After i had installed Windows on the Sata drive, and booted from it, the pc could not detect my other harddrives. The cdroms are working though. If i change to 'pata 1/2 + sata 1/2' from 'sata 1/2 + pata 3/4' in the bios, the harddrives is detected, but the cdrom stations are not.. can someone please help me?
i have phoenix bios.

Yours,

kof2000 · 10-16-2004, 03:43 AM

set it to enhanced sata support or something similar. that uses both ide+sata.

**Praetor** · 10-16-2004, 05:12 PM

Quote:

If I change to 'pata 1/2 + sata 1/2' from 'sata 1/2 + pata 3/4' in the bios, the harddrives is detected, but the cdrom stations are not..

Try setting SATA 1/2 and PATA 1/2/3/4? It seems you have a mobo/bios limitation on the number of active drives

Beregon · 10-16-2004, 11:27 PM

kof, how do i do that?

praetor, i only have 3 options on my sata drive mapping:

Sata 1/2
Sata 1/2 + pata 3/4
pata 1/2 + sata 1/2

thanks for ttrying to help me.

**Praetor** · 10-17-2004, 04:22 PM

Quote:

praetor, i only have 3 options on my sata drive mapping:

Then im sorry to say that your mobo (or rather, the chipset) isnt advanced enough to properly implement SATA/PATA drive arrays. The simplest solution here would be to buy an IDE PATA controller card (~$25).

Just a curiosity: it seems that the available configurations violate ATA specs .... if you disable SATA entirely, can you set PATA 1/2/3/4? (you should be able to) ... what motherboard is this?

Beregon · 10-17-2004, 04:40 PM

ye, that sounds fair. i looked at the web based manual for my mobo, and from what i read, it isnt possible to use my sata as boot drive, and still use both ide interfaces.
no use in trying to update my bios?

my mobo is one ****(lol?) called FUJITSU SIEMENS D1627.. its from fujitsu siemens, so what do you expect.. ^^
Are you sure that buying a IDE PATA controller card will solve my problem..?

and well, actually, where i choose my sata drive mapping is INside the sata configuration; in 'main', i can configure both the ata interfaces and the drives on them..

thanks prea, yoiu've been very helpful!

**Praetor** · 10-19-2004, 03:24 PM

Quote:

Are you sure that buying a IDE PATA controller card will solve my problem..?

Yes

Beregon · 10-20-2004, 09:10 AM

ok.. you have any good tips on a manufacturer?
and what does it do..?

**Praetor** · 10-20-2004, 02:33 PM

Promise is probably one of the more commonly available makers although I personalyl have not have very good experience with their more readily available models. Highpoint is another brand, for which ive had very good experiences with

Beregon · 10-22-2004, 06:26 PM

ok, thanks

btw, is this a good one?
http://www.directron.com/133s.html

10-15-2004, 11:30 PM	#1 (permalink)
Beregon New Member Join Date: Oct 2004 Posts: 12	sata does not work with my old hd's I just purchased a new Sata drive from seagate. in adition to the seagate, i have 2 cdroms and 2 WD 150 Gb harddrives. After i had installed Windows on the Sata drive, and booted from it, the pc could not detect my other harddrives. The cdroms are working though. If i change to 'pata 1/2 + sata 1/2' from 'sata 1/2 + pata 3/4' in the bios, the harddrives is detected, but the cdrom stations are not.. can someone please help me? i have phoenix bios. Yours,

10-16-2004, 03:43 AM	#2 (permalink)
kof2000 Diamond Member Join Date: Aug 2004 Location: Oahu Age: 27 Posts: 6,273	set it to enhanced sata support or something similar. that uses both ide+sata. __________________ QX9650@4.2 swiftech \|9600@3.0 9700 nt 780i \| 790fx 8gb ddr1200 \| 8gb ddr1200 2x150gb 3x1tb \|2x250gb 3x8800gtx \|3x2900xt 1gb 2x20xdvdrw \|2x20xdvdrw 15in1 card reader \|15in1 card reader ng15/g9 \|ng15/g9 1200w psu \|1200w psu 2x28" LCD \|2x28" LCD

10-20-2004, 02:33 PM	#9 (permalink)
Praetor Administrator Join Date: Jul 2004 Location: Canada Age: 25 Posts: 19,954	Promise is probably one of the more commonly available makers although I personalyl have not have very good experience with their more readily available models. Highpoint is another brand, for which ive had very good experiences with __________________ ASUS P5K Premium WiFi-AP, Q6600@3.7 / ASUS P5ND, E6400@3.8 4GB OCz Platinum XTC 8500 / 4GB CorsairXMS2 6400 5x500GB Seagate 7200.10 / 2x500 Seagate 7200.10 OCz 8800GTX 768MB @ 630/800 / 2x Galaxy 8800GT SLI

10-22-2004, 06:26 PM	#10 (permalink)
Beregon New Member Join Date: Oct 2004 Posts: 12	ok, thanks btw, is this a good one? http://www.directron.com/133s.html Last edited by Beregon; 10-22-2004 at 06:44 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-16-2004, 11:27 PM	#4 (permalink)
Beregon New Member Join Date: Oct 2004 Posts: 12	kof, how do i do that? praetor, i only have 3 options on my sata drive mapping: Sata 1/2 Sata 1/2 + pata 3/4 pata 1/2 + sata 1/2 thanks for ttrying to help me.

10-17-2004, 04:40 PM	#6 (permalink)
Beregon New Member Join Date: Oct 2004 Posts: 12	ye, that sounds fair. i looked at the web based manual for my mobo, and from what i read, it isnt possible to use my sata as boot drive, and still use both ide interfaces. no use in trying to update my bios? my mobo is one ****(lol?) called FUJITSU SIEMENS D1627.. its from fujitsu siemens, so what do you expect.. ^^ Are you sure that buying a IDE PATA controller card will solve my problem..? and well, actually, where i choose my sata drive mapping is INside the sata configuration; in 'main', i can configure both the ata interfaces and the drives on them.. thanks prea, yoiu've been very helpful!

10-20-2004, 09:10 AM	#8 (permalink)
Beregon New Member Join Date: Oct 2004 Posts: 12	ok.. you have any good tips on a manufacturer? and what does it do..?