kiis102

Hey guys,

i got a 250gb hard disk that was working up until last night when i got this error - http://img127.imageshack.us/img127/7...60622372gn.jpg i managed to get my other comps 40gb hard disk out and im running of that at the second. I connected up the 250gb one and formatted it and now when i boot the comp up (with both HD's installed) i get saying 'NTLDR is missing press ctrl+alt+delete to restart'. If i just have the 250gb i get the same error, if i just connect the 40gb one up it works fine. How can i fix this ?? Since the 250gb is now empty with no OS. *(I dont have a floppy drive but have DVD-RW + USB pen)

I tried to run XP CD at start up when it says something about run from CD/DVD i pressed enter but it didnt load the CD it just comes up with that ''NTLDR is missing press ctrl+alt+delete to restart'' error. SOmeone please help, i been trying to fix it all day and havn't got anywhere.

KIIS102

m0nk3ys1ms

ill find the link how to fix it, mine did this not to long ago.

how to:

go to the recovery console on the xp disc and type in the following:

copy e:\i386\ntldr c:\
copy e:\i386\ntdetect.com c:\

e is cd-rom drive letter
c is hard drive letter
change those if needed

that should fix it

RoninNYC17

i have the same problem. i followed the above steps and still cot the "NTLDR" is missing. any ideas?

Motoxrdude

Have you triend reformating your hard drive that has the problem?

__________________
RIP Mom 9/17/55-02/22/08.

TheChef

Well if your 250GB HD is the HD that the computer is booting off of without an OS, that'd be why you're getting the messages. Change your boot sequence in the BIOS when both HD's are connected to make sure that the computer is booting from teh HD with Windows installed.

__________________

Christian Darrall

try this

insert the xp cd rom into the drive (supposing you have one)

boot of the cd into the windows XP setup. and when asked press "R" for repair.

when you go into a black screen with white writing, it will ask which partition you want to fix. select it, and in the flashy dash thingy type "FIXBOOT" and also "CHKDSK" ok. and that should sort your problem.

it might work with the cdrom in the drive while booting to the hard drive, but i think it means you have to keep it in to boot into windows everytime.

__________________
1.5TB 3.0GBS Panasonic SATA
XFX 9600gt Dual core X3 (super SLi)
Intel Quad Core Oc'd 6.7ghZ
1000w power supply
3GB ddr 3 1200MHZ
Antec Water Cooling
XP Professional
19.1 inch Widescreen

RoninNYC17

Im just using the 250gb harddrive. ive narrowed it down to a corrupted or missing boot.ini file. when i go to rebuild it though, it says it cant find any boot.ini file. ive tried reformatting probably 8 times, and after i reformat i get missing ntldr. i copy ntldr and ntdetect and then i get the boot.ini error message, followed shortly by the missing hal.dll message. is there anyway to do a similar fix to the ntldr? maybe get a copy of hal.dll and copy it into my OS using the recovery console? if so where would it go?

Christian Darrall

well it goes into the sytem32 windows directory and well if you want a copy i have one but dont know how to send it u

__________________
1.5TB 3.0GBS Panasonic SATA
XFX 9600gt Dual core X3 (super SLi)
Intel Quad Core Oc'd 6.7ghZ
1000w power supply
3GB ddr 3 1200MHZ
Antec Water Cooling
XP Professional
19.1 inch Widescreen

m0nk3ys1ms

just copy boot.ini and hal.dll file from the recovery console

RoninNYC17

i tried installing windows 2k pro and i got a different error, so at this point im assuming its hardware related. no biggie the computer served me well for almost 5 years and i just ordered a new one. thanks for your help anyway