magicman

I've just ordered £400 of new stuff, namely an MSI K8N Neo4-F and an MSI 7900GTX (I must have a thing for MSI at the moment ). The thing is, I've got a Raid0 running at the moment, and I've just got XP exactly how I like it, so I'd quite like to preserve it.

Will it just be a case of enabling the Raid on the SATA slots, and automatic detection doing the rest? Also, are the NF3 and NF4 similar enough to not need a repair install of XP?

__________________

FOLDING FOR THE GOOD OF MANKIND :F@H Team 44358

vanp1992

you mine as re-install windows, there will be minor Bugs if u get the RAID to work.

FOr the RAID if its on the SAME Chip that created the raid it will work, im not sure about the SAME BRAND of chips like Nforce 3 or 4 ,i think itll work

Just rememebr to not re-raid other wise u lose all your data

__________________
PCI-E SYstem (Incomplete)

Abit A8N-SLI FATALITY
AMD Athlon 64 X2 3800+
OCZ PC3200 2GB of Ram
XFX 8800 GTS XXX
Western Digital 160 GB X2 @ RAID
Western Digital 320 GB

meanman

you should reinstall windows the drivers for your present mobo will be diffrent to your new one

magicman

Just to give you an update, I've had another instance to prove the rule that nothing ever runs smoothly for me pc-wise.

I figured, before asking, that the Raid would work but that Windows would require a reinstall, which seems to be where vanp1992 and meanman were heading as well. So I rigged the hardware up, and configured the bios to activate Raid on the required slots. Hey presto, it was detected and shown as healthy. So far so good. Then I go through the Windows setup, and sure enough it detects my previous installation on the Raid, which I choose to repair. All's well until the very end of the installation when it clears temp files used and restarts. This time, the pc freezes with a black screen and a white cursor. After about 10 mins of waiting to see if it'll kick itself out of it, I manually restart, at which point normal service resumes, the resolution callibration goes through and I reach the desktop with all programs/settings intact. Very strange. After some time I go to restart the pc via the start menu, and Windows shuts down. But just before the pc resets, it freezes with no monitor input. When I push the reset button, it works fine, until I want to restart again. Same deal.

So I decide to repair install again. This time it freezes half way through, during the device installs. Various hardware configs later, I give up on trying to repair, but at that point I had too much info on the raid I still hadn't backed up. So I install a fresh XP onto a spare IDE drive, along with all mobo drivers, and lo and behold my raid is perfectly good, with all files and folders intact, along with what looks like half an XP installation... With the IDE XP shell and a few programs like Nero, I go ahead and back up about 100GB of data onto 4.7GB DVD's, and then try a fresh installation onto the raid, which I reinitialize just for good measure. This time, it worked flawlessly.

At least now I have disk backups of important data (whereas before I was reliant on physical hard drives), and a working XP on the Raid0. Now I'm faced with the prospect of reinstalling around 100 programs which I use frequently as well as the 20ish games I can now play with what I can say is a very nice card.

__________________

FOLDING FOR THE GOOD OF MANKIND :F@H Team 44358

robina_80

mate i think you will have to reinstall windows again

__________________
Windows Vista Home Pre x32
AMD 4200X2 S939 512K (2.2)
512M ASUS EN7600GSTOP SILENT
1x80Gb 1x320gb SATA2
2Gb Dual Channel PC3200 Non-ECC DDR Memory
Gbyte K8N PRO SLi s939 nF4
530W TAGAN 2FORCE T530-U22
Clabs Aud 2 ZS 7.1 OEM

magicman

Read the above post. That's what I did.

__________________

FOLDING FOR THE GOOD OF MANKIND :F@H Team 44358