 |
 |
|
|
|||||||
|
||||||||
12-09-2004, 05:44 PM
|
#1 (permalink) |
|
New Member
 Join Date: Dec 2004
Posts: 7
|
Coolriver waterpump
I've got a brand new watercooling system and the pump worked for a couple of hours, now itz not pumping nemore, though if u put it to your ear u can hear a sound of it running...
there is enough liquid and stuff in it... do you think itz broken or is there a way to fix it.... thx |
|
|
|
12-17-2004, 10:52 AM
|
#2 (permalink) |
|
Administrator
 
Join Date: Jul 2004
Location: Canada
Age: 25
Posts: 19,951
|
Whats the make and model?
__________________
ASUS P5K Premium WiFi-AP, Q6600@3.7 / ASUS P5ND, E6400@3.8 4GB OCz Platinum XTC 8500 / 4GB CorsairXMS2 6400 5x500GB Seagate 7200.10 / 2x500 Seagate 7200.10 OCz 8800GTX 768MB @ 630/800 / 2x Galaxy 8800GT SLI |
|
|
|
|
12-17-2004, 03:29 PM
|
#3 (permalink) |
|
New Member
Join Date: Dec 2004
Posts: 7
|
it's by coolriver:
http://www.coolriver.de/coolriver/eng/index.htm and its the coolriver deluxe version
__________________
Pentium IV Prescott 3,0E GHZ 800FSB @ 3,6 Ghz (i dunno how itz possible but it is stable at bout 45-55°) 1024 MB DDR2 RAM 533mhz MSI 865PE Neo2-PFS with corecell chip for dynamic overclocking. Watercooled GPU, CPU, Northbridge with 400 l/h 80GB HDD :o |
|
|
|
|
12-17-2004, 03:44 PM
|
#4 (permalink) |
|
Gold Member
 Join Date: Jul 2004
Age: 33
Posts: 344
|
Although it doesnt say much about the specs. of the WC kit, usually its trapped air thats causing it, did you BLEED your WC first, this is a must for WC, trapped air can ruin your pump.
__________________
MOBO: ASUS P4C800E DELUXE CPU: P4 3.4HT @ 3.918ghz COOLING: Vapochill PE / MCW20-P /MCW50 /MCP650/ BIX RAM: TWINX1024-4400C25 CORSAIR HDD: MAXTOR 120GB/8MB OS: XP PRO SC: TURTLE BEACH SANTA CRUZ 5.1 PSU: OCZ Modstream 520W |
|
|
|
|
12-17-2004, 04:03 PM
|
#5 (permalink) |
|
New Member
Join Date: Dec 2004
Posts: 7
|
its a 72l/h pump and the pump is inside the thigy with the coolin liquid, when i bought i let it run for few mins and then installed it, after that it worked for some time, now it doesnt anymore....could it be cause of my crappy PSU, itz only a 250W one.....im getting a 500W one though
__________________
Pentium IV Prescott 3,0E GHZ 800FSB @ 3,6 Ghz (i dunno how itz possible but it is stable at bout 45-55°) 1024 MB DDR2 RAM 533mhz MSI 865PE Neo2-PFS with corecell chip for dynamic overclocking. Watercooled GPU, CPU, Northbridge with 400 l/h 80GB HDD :o |
|
|
|
|
12-17-2004, 04:13 PM
|
#6 (permalink) |
|
Gold Member
Join Date: Jul 2004
Age: 33
Posts: 344
|
good idea.....and also remember to run your WC at least 24hrs before installing it, possible leak may occur, you dont wanna fry your PC, and bleed it to make sure no air is trapped and update us. Gud Luck
__________________
MOBO: ASUS P4C800E DELUXE CPU: P4 3.4HT @ 3.918ghz COOLING: Vapochill PE / MCW20-P /MCW50 /MCP650/ BIX RAM: TWINX1024-4400C25 CORSAIR HDD: MAXTOR 120GB/8MB OS: XP PRO SC: TURTLE BEACH SANTA CRUZ 5.1 PSU: OCZ Modstream 520W |
|
|
|
|
12-17-2004, 04:19 PM
|
#7 (permalink) |
|
New Member
Join Date: Dec 2004
Posts: 7
|
yeah thx
, wut does it mean to bleed it:$ sry ma english aint dat good...:$;-)
__________________
Pentium IV Prescott 3,0E GHZ 800FSB @ 3,6 Ghz (i dunno how itz possible but it is stable at bout 45-55°) 1024 MB DDR2 RAM 533mhz MSI 865PE Neo2-PFS with corecell chip for dynamic overclocking. Watercooled GPU, CPU, Northbridge with 400 l/h 80GB HDD :o |
|
|
|
|
12-17-2004, 04:31 PM
|
#8 (permalink) |
|
Gold Member
Join Date: Jul 2004
Age: 33
Posts: 344
|
bleed is to eliminate air in your loop and hardware(pump,blocks,radiator)which causes your WC not to perform up to par. How? open your reservoir cap/run your WC/check for air trapped in your loop, run it until all the air is gone or minimize, tilt your case in every direction to letthe air out(just enough not to spill water on you system or youll fry your PC) run you WC for at least a day without a cap(reservoir).
__________________
MOBO: ASUS P4C800E DELUXE CPU: P4 3.4HT @ 3.918ghz COOLING: Vapochill PE / MCW20-P /MCW50 /MCP650/ BIX RAM: TWINX1024-4400C25 CORSAIR HDD: MAXTOR 120GB/8MB OS: XP PRO SC: TURTLE BEACH SANTA CRUZ 5.1 PSU: OCZ Modstream 520W |
|
|
|
|
12-17-2004, 04:38 PM
|
#9 (permalink) |
|
New Member
Join Date: Dec 2004
Posts: 7
|
oh ok thx
__________________
Pentium IV Prescott 3,0E GHZ 800FSB @ 3,6 Ghz (i dunno how itz possible but it is stable at bout 45-55°) 1024 MB DDR2 RAM 533mhz MSI 865PE Neo2-PFS with corecell chip for dynamic overclocking. Watercooled GPU, CPU, Northbridge with 400 l/h 80GB HDD :o |
|
|
|
|
12-17-2004, 05:52 PM
|
#10 (permalink) |
|
Gold Member
Join Date: Jul 2004
Age: 33
Posts: 344
|
NO PROLEMO
__________________
MOBO: ASUS P4C800E DELUXE CPU: P4 3.4HT @ 3.918ghz COOLING: Vapochill PE / MCW20-P /MCW50 /MCP650/ BIX RAM: TWINX1024-4400C25 CORSAIR HDD: MAXTOR 120GB/8MB OS: XP PRO SC: TURTLE BEACH SANTA CRUZ 5.1 PSU: OCZ Modstream 520W |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
