[ULKER]

My PC:
CPU: E6300
Motherboard: Asus P5B
Ram: Corsair XMS2 800MHz, 5.5.5.15 timings
Video: eVGA 7900GT
PSU: ULTRA V-Series 500W

So I wan't to overclock my CPU and I have few questions:
What PCI-E speed should i set? (auto, 100-150MHz) ?
What PCI speed should i set? (33.1MHz, auto) ?
What ram speed should i set? (auto ....)

Thanks for information.

__________________
-|-Allendale E6300 1.86@3.22GHz-|-Asus P5B-|-Corsair XMS2 2GB 800@940MHz-|-eVGA 7900GT-|-Seagate 250GB-|-ULTRA V Series 500W-|- ViewSonic Xtreme VX922 19" LCD-|-

jph1589

I would start with 100......33.3.......and auto. Depending how good the memory is, maybe that will be ok. If not, slow the memory down and start over. The process over overclocking the E6300 shouldn't be any different than a pentium 4 or D. The multiplier is locked so you just have the FSB and memory to tweak.

__________________
These aren't the drones you are looking for......

ECS C19-A SLI w/ P4 520J @3.5 ghz/
Scythe Katana 775
2x512 Corsair VS DDR2 533
XFX Geforce 6600GT @570MHZ and 1.14GHZ
Hauppauge PVR 150
Seagate 120GB Sata / Maxtor 100GB IDE
Antec TPII 450
NZXT Nemesis

fade2green514

www.overclock.net
this forum is good for help like that but you'll get a lot more opinions from that one, and maybe someone even owns the board. im getting that same board, only an e6400 because i want to get it up past 3.2ghz if i can (the extra multiplier helps). people have gotten them to 3.4ghz on stock voltage (0.85V to 1.3525V) before.

__________________

Core 2 Duo e6300 (2.71ghz o/ced)(Q6600 soon!)
Thermaltake Big Typhoon CPU cooler
DFI Infinity 975X motherboard
7800gt 256mb + NV silencer (HD 4850 soon!)
2x2gb G.Skill ddr2-800 4-4-4-12 (2.1v)
2x80gb WD 8mb sata2 in RAID 0 system drive
1x250gb Seagate 7200.9 storage drive
Windows Vista x64