Finnaly Got My New System

DKdeadly · 08-25-2006, 02:04 AM

I just got my new core 2 duo system.spec are in my sig.

Tell me if these temps are good:

Cpu:42c But room temp is 81F
Gpu:43c
Hardrive:43c
Motherboard:41c

Will see the temps underfull load but so far i think the cpu temp is too high.Dont ask me about idle/load yet because i got the system for 10 minutes because i had to go somewhere.These temps were after computer was on for 8 minutes and open everest.Dont think it was at full load.

using zalman 9500

Will post picture tomorrow on the General Computer Chat in the post your computer pic(or w/e its called)

Tell me what you think.

DKdeadly · 08-25-2006, 02:46 AM

ok did some prime95 test and this is what i got

i am worried!!

Plz advice needed.

red is cpu
black is hardrive
green is motherboard
blue is gpu

on the taskbar

Jet · 08-25-2006, 02:51 AM

not bad temperatures. Speedfan is a great program that might be helpful to you. It also measures temps, but in graphical over time as well as current in digits.

DKdeadly · 08-25-2006, 03:09 AM

ok speedfan is fuk up

look at this i just increased the fan by 5 and look.

[img=http://img201.imageshack.us/img201/4314/untitled2af8.th.jpg]

[img=http://img201.imageshack.us/img201/3086/untitled1ho1.th.jpg]

and everest temps are diffrent WHAT IS WRONG?

oo now look at this guys during downloading 3dmark06 look at my temps

and why is my fan only going 1.4 rpm when it could go all the way up to 2.6rpm?

adn this

DKdeadly · 08-25-2006, 11:59 PM

Can i get some help?

bball4life · 08-26-2006, 12:16 AM

Hmm, those temps seem high for a core 2, I mean my 3700+ runs at like 43C oc'ed under 100% load, and core two's are supposed to run cool. Reseat the heatsink, leave your cpu fan at 100% the whole time, there is not point in letting it speed up and slow down. Also are you using stock cooling?

DKdeadly · 08-26-2006, 12:48 AM

yea reset the heatsink ight and i am using zalman 9500 it should run cool.And how to force the fans to work faster?

bball4life · 08-26-2006, 12:50 AM

Quote:

Originally Posted by DKdeadly

yea reset the heatsink ight and i am using zalman 9500 it should run cool.And how to force the fans to work faster?

Well normally there is a setting in the bios, its called different things for different manufacturers, but it controls how fast the fan is going, compared to the temp. You can also do this in speed fan or buy a fan controller and do taht, or but a 4 pin molex to 3 pin converter and plug it straight into the mobo.

DKdeadly · 08-26-2006, 02:35 AM

i set it for performance but didnt decrease any degrees

Dont know will just have to put the heatsink back all overagain.

and is 42C for harddrive and 43C for gpu and 41C for motherboard fine?

bball4life · 08-26-2006, 03:55 AM

Your gpu temp is fine, mine used to idle at 47, but my hdd runs at 30c and my motherboard right around there. Sounds like you have an air flow problem.

. If your harddrive and your video card are at the same level drop your harddrive to the lowest it can go, so the air can flow over the harddrive then over the video card, unless you hard drive rack is suspended then raise it up to achieve the same result. I did this and my cpu temps dropped 3c. Also clean your wires up, tie them all back out of the way, even one can make a difference. Last how many fans do you have, what sizes and where?

08-25-2006, 02:04 AM	#1 (permalink)
DKdeadly Gold Member Join Date: Apr 2006 Posts: 397	Finnaly Got My New System I just got my new core 2 duo system.spec are in my sig. Tell me if these temps are good: Cpu:42c But room temp is 81F Gpu:43c Hardrive:43c Motherboard:41c Will see the temps underfull load but so far i think the cpu temp is too high.Dont ask me about idle/load yet because i got the system for 10 minutes because i had to go somewhere.These temps were after computer was on for 8 minutes and open everest.Dont think it was at full load. using zalman 9500 Will post picture tomorrow on the General Computer Chat in the post your computer pic(or w/e its called) Tell me what you think. __________________ Intel Conroe E6600 at 3.21 ghz Corsair XMS2 3gb DDR2 800 Asus P5W Deluxe Thermaltake Tsunami Case Western Digital Raptor 150gb +Seagate 320GB 7200.10 Antec NeoHe 550 watts Evga 7600gt CO 605core 801 mem Creative Labs Xfi elite pro Logitech z-5500 speakers Dell UltraSharp 2407WFP Last edited by DKdeadly; 08-25-2006 at 02:44 AM.

08-25-2006, 02:46 AM	#2 (permalink)
DKdeadly Gold Member Join Date: Apr 2006 Posts: 397	ok did some prime95 test and this is what i got i am worried!! Plz advice needed. red is cpu black is hardrive green is motherboard blue is gpu on the taskbar __________________ Intel Conroe E6600 at 3.21 ghz Corsair XMS2 3gb DDR2 800 Asus P5W Deluxe Thermaltake Tsunami Case Western Digital Raptor 150gb +Seagate 320GB 7200.10 Antec NeoHe 550 watts Evga 7600gt CO 605core 801 mem Creative Labs Xfi elite pro Logitech z-5500 speakers Dell UltraSharp 2407WFP

08-25-2006, 02:51 AM	#3 (permalink)
Jet Diamond Member Join Date: Oct 2005 Posts: 5,285	not bad temperatures. Speedfan is a great program that might be helpful to you. It also measures temps, but in graphical over time as well as current in digits. __________________ Macbook/Intel Core Duo 1.83Ghz/2GB DDR2 667/60GB HD/OSX 10.4.11/160GB 3.5" Firewire External/160GB Maxtor One Touch 4 Mini External/

08-25-2006, 03:09 AM	#4 (permalink)
DKdeadly Gold Member Join Date: Apr 2006 Posts: 397	ok speedfan is fuk up look at this i just increased the fan by 5 and look. [img=http://img201.imageshack.us/img201/4314/untitled2af8.th.jpg] [img=http://img201.imageshack.us/img201/3086/untitled1ho1.th.jpg] and everest temps are diffrent WHAT IS WRONG? oo now look at this guys during downloading 3dmark06 look at my temps and why is my fan only going 1.4 rpm when it could go all the way up to 2.6rpm? adn this __________________ Intel Conroe E6600 at 3.21 ghz Corsair XMS2 3gb DDR2 800 Asus P5W Deluxe Thermaltake Tsunami Case Western Digital Raptor 150gb +Seagate 320GB 7200.10 Antec NeoHe 550 watts Evga 7600gt CO 605core 801 mem Creative Labs Xfi elite pro Logitech z-5500 speakers Dell UltraSharp 2407WFP Last edited by DKdeadly; 08-25-2006 at 03:29 AM.

08-25-2006, 11:59 PM	#5 (permalink)
DKdeadly Gold Member Join Date: Apr 2006 Posts: 397	Can i get some help? __________________ Intel Conroe E6600 at 3.21 ghz Corsair XMS2 3gb DDR2 800 Asus P5W Deluxe Thermaltake Tsunami Case Western Digital Raptor 150gb +Seagate 320GB 7200.10 Antec NeoHe 550 watts Evga 7600gt CO 605core 801 mem Creative Labs Xfi elite pro Logitech z-5500 speakers Dell UltraSharp 2407WFP

08-26-2006, 12:16 AM	#6 (permalink)
bball4life Diamond Member Join Date: Jun 2006 Location: Somewhere.... Posts: 1,423	Hmm, those temps seem high for a core 2, I mean my 3700+ runs at like 43C oc'ed under 100% load, and core two's are supposed to run cool. Reseat the heatsink, leave your cpu fan at 100% the whole time, there is not point in letting it speed up and slow down. Also are you using stock cooling? __________________ Fold To Cure Team 12912 AMD 3700+ San Diego (@2.75) I A8N SLI premium I 1 GB OCZ Gold PC3200 (@460 2-2-2-5) I 160GB Seagate HDD I EVGA 7900GT KO (@550/1800) I Seasonic S12 600W SLI PSU I Audigy 2ZS I MX3100 Mouse/Keyboard I Logitech x5300 I Dell E193FP 19" LCD I Black Aspire X-Cruiser Macbook I 2.0GHz Yonah I 1GB RAM I 80GB HDD

08-26-2006, 12:48 AM	#7 (permalink)
DKdeadly Gold Member Join Date: Apr 2006 Posts: 397	yea reset the heatsink ight and i am using zalman 9500 it should run cool.And how to force the fans to work faster? __________________ Intel Conroe E6600 at 3.21 ghz Corsair XMS2 3gb DDR2 800 Asus P5W Deluxe Thermaltake Tsunami Case Western Digital Raptor 150gb +Seagate 320GB 7200.10 Antec NeoHe 550 watts Evga 7600gt CO 605core 801 mem Creative Labs Xfi elite pro Logitech z-5500 speakers Dell UltraSharp 2407WFP

08-26-2006, 02:35 AM	#9 (permalink)
DKdeadly Gold Member Join Date: Apr 2006 Posts: 397	i set it for performance but didnt decrease any degrees Dont know will just have to put the heatsink back all overagain. and is 42C for harddrive and 43C for gpu and 41C for motherboard fine? __________________ Intel Conroe E6600 at 3.21 ghz Corsair XMS2 3gb DDR2 800 Asus P5W Deluxe Thermaltake Tsunami Case Western Digital Raptor 150gb +Seagate 320GB 7200.10 Antec NeoHe 550 watts Evga 7600gt CO 605core 801 mem Creative Labs Xfi elite pro Logitech z-5500 speakers Dell UltraSharp 2407WFP

08-26-2006, 03:55 AM	#10 (permalink)
bball4life Diamond Member Join Date: Jun 2006 Location: Somewhere.... Posts: 1,423	Your gpu temp is fine, mine used to idle at 47, but my hdd runs at 30c and my motherboard right around there. Sounds like you have an air flow problem. . If your harddrive and your video card are at the same level drop your harddrive to the lowest it can go, so the air can flow over the harddrive then over the video card, unless you hard drive rack is suspended then raise it up to achieve the same result. I did this and my cpu temps dropped 3c. Also clean your wires up, tie them all back out of the way, even one can make a difference. Last how many fans do you have, what sizes and where? __________________ Fold To Cure Team 12912 AMD 3700+ San Diego (@2.75) I A8N SLI premium I 1 GB OCZ Gold PC3200 (@460 2-2-2-5) I 160GB Seagate HDD I EVGA 7900GT KO (@550/1800) I Seasonic S12 600W SLI PSU I Audigy 2ZS I MX3100 Mouse/Keyboard I Logitech x5300 I Dell E193FP 19" LCD I Black Aspire X-Cruiser Macbook I 2.0GHz Yonah I 1GB RAM I 80GB HDD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unstable System - Need Help	sodamhall	Computer Memory and Hard Drives	3	06-28-2006 04:32 PM
operating system installation problemss	lodidodi	Operating Systems	4	06-12-2006 01:03 PM
System stalls during first few seconds of gaming!	Bootup05	Video Cards and Monitors	3	06-07-2006 01:51 PM
lost setup and system password windows me operat. system	the50doctor	Motherboards	13	08-17-2005 08:24 PM
Intel vs. AMD.... what do you prefer?	McG	CPUs and Overclocking	23	11-11-2004 01:38 PM