Put in new hard drive...now DVD burner does not work

RedStal95 · 10-20-2006, 11:15 AM

I put in my new hard drive yesterday and that is working fine but now my dvd burner errors out whenever I try to make a dvd backup using either hard drive. Any help is greatly appreciated

This is the error message I get:

"Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM
Nero API version: 6.6.0.19
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 19d

Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB01 - HA 1 TA 1 - 6.6.0.19
Adapter driver: <nvidesm> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI

=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1600JS-60MHB5 10.0 SI3112r Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD1200JB-00DUA3 75.1 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVD SHD-16P1S GS05 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : TSSTcorpCD/DVDW SH-S182MSB01 nvidesm Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S182M E: CDRom1
LITE-ON DVD SHD-16P1S D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 117MB (120020kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

19.10.2006
NeroAPI
10:36:45 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started

10:36:45 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)

10:36:45 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted

10:36:46 PM #4 Text 0 File Reader.cpp, Line 127
Reader running

10:36:46 PM #5 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-S182M running

10:36:46 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.

10:36:46 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:36:46 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)

10:36:46 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media

10:36:46 PM #10 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)

10:36:46 PM #11 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO

10:36:46 PM #12 Text 0 File DlgWaitCD.cpp, Line 2494
Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193

10:36:46 PM #13 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:36:46 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW SH-S182M]
--------------------------------------------------------------

10:36:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00

10:36:47 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started

10:36:47 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.

10:36:47 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed

10:36:47 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 16x (22,160 KB/s)

10:36:49 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:36:50 PM #21 Text 0 File DVDR.cpp, Line 2619
Recording mode: Sequential Recording Mode

10:36:50 PM #22 Text 0 File Mmc.cpp, Line 21864
Set BUFE: Super Link -> ON

10:36:50 PM #23 Text 0 File DVDR.cpp, Line 2774
Start write address at LBA 0
DVD high compatibility mode: Yes

10:36:50 PM #24 Text 0 File Cdrdrv.cpp, Line 8926
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:37:02 PM #25 SCSI -500 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0BFE0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

10:37:08 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0CB41400
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

10:37:08 PM #27 Text 0 File Mmc.cpp, Line 19530
Writer-Buffer for TSSTcorp CD/DVDW SH-S182M\H1 T1 reduced to 32768Bytes

10:37:12 PM #28 Text 0 File Cdrdrv.cpp, Line 1289
22:37:12.148 - TSSTcorp CD/DVDW SH-S182M\H1 T1 : Queue again later

10:37:18 PM #29 SCSI -500 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0CB41400
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

10:37:18 PM #30 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
TSSTcorp CD/DVDW SH-S182M\H1 T1

10:37:18 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:37:22 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

10:37:22 PM #33 Text 0 File DVDR.cpp, Line 3017
EndDAO: Last written address was -1

10:37:22 PM #34 SCSI -1023 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0012A970
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x02 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

10:37:22 PM #35 SCSI -1023 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0012AC28
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x3C 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x32 0x01 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x

10:37:22 PM #36 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 16x (22,160 KB/s)

10:37:22 PM #37 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.

10:37:22 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 8/11/2006 12:35:31 PM (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)"

SirKenin · 10-20-2006, 12:04 PM

I don't have the patience to read all that gibberish, but are they on separate cables?

RedStal95 · 10-20-2006, 06:39 PM

They are on separate cables

Angel.of.Death · 10-21-2006, 04:29 AM

Is your new HDD SATA or IDE?

RedStal95 · 10-21-2006, 03:43 PM

My first HDD is IDE. The one I just added is SATA.

Angel.of.Death · 10-22-2006, 05:43 AM

Have you tried unplugging your new HDD drive and tried using your DVD drive? If it works, we can isolate the problem to being a conflict between the DVD drive and HDD.

Maybe your HDD make doesnt like your DVD drive. Try another HDD and see whether that works so we can further isolate the problem...

Another crazy idea - do you think your PSU is pumping out enough power to feed both drives? (This is probably not the problem. Try my first two suggestions).

RedStal95 · 10-22-2006, 08:11 PM

I unplugged my new hard drive completely and the dvd burner still errors...so if I'm correct that cancels out the three possibilities you just mentioned.

I should have mentioned this earlier, but I replaced my regular (but very old) dvd-rom with a new one at the same time I put in my new HDD but did not change the cable configuration.

Could this have something to do with my problem?

StrangleHold · 10-22-2006, 09:03 PM

Quote:

Originally Posted by RedStal95

I unplugged my new hard drive completely and the dvd burner still errors...so if I'm correct that cancels out the three possibilities you just mentioned.

I should have mentioned this earlier, but I replaced my regular (but very old) dvd-rom with a new one at the same time I put in my new HDD but did not change the cable configuration.

Could this have something to do with my problem?

Did you set the jumpers right on the DVD rom

RedStal95 · 10-22-2006, 10:36 PM

I don't know what "right" is, but I set them the same as they were with the dvd rom I replaced.

Angel.of.Death · 10-23-2006, 07:19 AM

The jumpers should be right - if they were wrong, the drive wouldnt even be detected.

My verdict = Try the same HDD and DVD burner with another comp to eliminate motherboard compatability problems...

Good luck

10-20-2006, 12:04 PM	#2 (permalink)
SirKenin Diamond Member Join Date: Aug 2006 Location: In a box, under a bridge...With EVDO internet. Age: 37 Posts: 4,603	I don't have the patience to read all that gibberish, but are they on separate cables? __________________ cpu: Intel E8400/Asus Silent Knight AL mobo: Asus Striker Extreme Case/PSU: Antec 900/Antec TruPower Quattro 1000W RAM: 4GB OCZ Gold GX XTC DDR2-800 VGA: 8800GTX 768 MB, Asus PhysX Sound: SB X-Fi Fatal1ty DVD: 2 x Pioneer SATA DVD/RW HDD: WD RaptorX 150GB, Raptor 74GB, Seagate 750GB Monitor: 37" Sharp Aquos 1080p Do you really care? I didn't think so.

10-21-2006, 04:29 AM	#4 (permalink)
Angel.of.Death Silver Member Join Date: Oct 2006 Location: Sydney, Australia Age: 15 Posts: 213	Is your new HDD SATA or IDE? __________________ "Death is not something to be feared. It is something to be embraced."

10-22-2006, 05:43 AM	#6 (permalink)
Angel.of.Death Silver Member Join Date: Oct 2006 Location: Sydney, Australia Age: 15 Posts: 213	Have you tried unplugging your new HDD drive and tried using your DVD drive? If it works, we can isolate the problem to being a conflict between the DVD drive and HDD. Maybe your HDD make doesnt like your DVD drive. Try another HDD and see whether that works so we can further isolate the problem... Another crazy idea - do you think your PSU is pumping out enough power to feed both drives? (This is probably not the problem. Try my first two suggestions). __________________ "Death is not something to be feared. It is something to be embraced."

10-22-2006, 08:11 PM	#7 (permalink)
RedStal95 New Member Join Date: Sep 2006 Posts: 12	I unplugged my new hard drive completely and the dvd burner still errors...so if I'm correct that cancels out the three possibilities you just mentioned. I should have mentioned this earlier, but I replaced my regular (but very old) dvd-rom with a new one at the same time I put in my new HDD but did not change the cable configuration. Could this have something to do with my problem? Last edited by RedStal95; 10-22-2006 at 08:16 PM.

10-20-2006, 06:39 PM	#3 (permalink)
RedStal95 New Member Join Date: Sep 2006 Posts: 12	They are on separate cables

10-21-2006, 03:43 PM	#5 (permalink)
RedStal95 New Member Join Date: Sep 2006 Posts: 12	My first HDD is IDE. The one I just added is SATA.

10-22-2006, 10:36 PM	#9 (permalink)
RedStal95 New Member Join Date: Sep 2006 Posts: 12	I don't know what "right" is, but I set them the same as they were with the dvd rom I replaced.

10-23-2006, 07:19 AM	#10 (permalink)
Angel.of.Death Silver Member Join Date: Oct 2006 Location: Sydney, Australia Age: 15 Posts: 213	The jumpers should be right - if they were wrong, the drive wouldnt even be detected. My verdict = Try the same HDD and DVD burner with another comp to eliminate motherboard compatability problems... Good luck __________________ "Death is not something to be feared. It is something to be embraced."

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Will this hard drive work with my comp?	RedStal95	Computer Memory and Hard Drives	8	10-19-2006 12:36 AM
Can't get DVD burner to work! Please help!	Nolangela	CD/DVD Technology	3	09-04-2006 03:09 PM
dvd player with hard drive	Michaela521	Computer Memory and Hard Drives	2	03-17-2006 02:25 PM
will this dvd drive work with my motherboard	ckfordy	CD/DVD Technology	6	08-17-2005 12:25 AM
DVD Burner dosent work.	gaufjell	CD/DVD Technology	5	06-05-2005 09:45 AM