USB driver trouble..

**Archangel** · 11-04-2006, 09:32 PM

When windows starts... it turns off the USB ports as soon as it loads windows.
when i go to the device manager, i see 1 usb controller with the yellow i con next to it.. but when i uninstal it, check for hardware changes.. it install's, and works fine. its just on each new start of the pc its disabled

the biggest problem is... my mouse and keyboard are USB.. so I have a 2nd mouse over here atm to instal the USB controller.
But.. can anyone help me on this one? I really dont know what i could do about it.

PC eye · 11-04-2006, 10:36 PM

Are you seeing an error messages? Make sure the usb controllers are enabled in the bios. Here's a pair of links that also refer go into this. That seems the most likely cause there.
http://www.intel.com/support/periphe.../cs-011939.htm
http://www.microsoft.com/whdc/archive/usbcompat.mspx

tlarkin · 11-04-2006, 10:37 PM

what does the event viewer say?

What usb devices are all plugged in at boot up?

**Archangel** · 11-04-2006, 10:47 PM

stupid question... what is the event viewer, and where do i find it? :x
As for the devices,.. my keyboard, my mouse (well, trackball) and the Creative IR remote reciever that came with my soundcard. ( but it does the same when i remove it)

edit: the funny thing is tough.. i can use the USB keyboard in the bios and all,.. it also recognizes the Keyboard, mouse and hub (build into the keyboard) in the bios.. to its really just windows messing around

tlarkin · 11-04-2006, 10:53 PM

Your BIOS will control your onboard USB controller before windows boots and takes over, that is normal behavior.

To access the event viewer (there is more than one way) click Start > Right click My computer > Manage > Event Viewer > System Log

Any errors relating to USB?

you can also access it via control panles > Administrative Tools > Computer Management > event viewer

**Archangel** · 11-04-2006, 11:06 PM

Oh my... there is a load of errors in there.. ( but i cant find any related to usb.. ) well,.. ive been messing around, looking if i could find something.. so i'll reboot the pc, and see what error's are there then. (I assume thats what you mean? )

tlarkin · 11-04-2006, 11:09 PM

some errors are normal, like DHCP release/renew errors, and windows defender keeps calling my VNC connection spyware, even though its something I installed myself LOL

Make sure your USB is in working manner, then reboot the system, if the errors persist something in event viewer may pop up. However, windows error logs lack a lot of good info.

**Archangel** · 11-04-2006, 11:40 PM

ok, i rebooted,.. the yellow icon was there again,.. the error from the device manager

Quote:

This device cannot start. (Code 10)

Click Troubleshoot to start the troubleshooter for this device.

and i only found 2 error's of the time of this reboot.

pic of the errors + device manager

and here is the error message (both are ideantical)

Quote:

The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
{555F3418-D99E-4E51-800A-6E89CFD8B1D7}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19). This security permission can be modified using the Component Services administrative tool.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

tlarkin · 11-04-2006, 11:58 PM

do you have a usb card reader installed?

the CLSID error has to do with UUIDs, and the class ID is a reg key that is trying to connect with some local service. UUIDs are specific indentifers on hardware. Similar to a MAC address on a NIC. CLSID is just another name for it.

see this: http://en.wikipedia.org/wiki/Globally_Unique_Identifier

Have you recently installed any kind of new usb controller or ran any updates for drivers/firmware? It looks like you have an onboard and a PCI USB controller...Does the problem persist when you yank the PCI USB card out? Or have you recenlty added any new USB devices?

Perhaps you have a bonofied GUID conflict, which technically isn't suppose to happen.

**Cromewell** · 11-05-2006, 12:05 AM

It's odd that it's not working by default but open Component Services (Control Panel->Administrative Tools). Expand the Component Services section, expand computers, right click on My Computer and pick properties. Go to the com security tab and click 'edit default' in the launch and activation premissions section. Check that system and interactive have both locals checked and Administrators have everythign checked.

If that doesn't work add user NT AUTHORITY and grant it Local Activation and Local Launch.

11-04-2006, 09:32 PM	#1 (permalink)
Archangel Moderator Join Date: Jan 2005 Location: Netherlands Age: 21 Posts: 7,868	USB driver trouble.. When windows starts... it turns off the USB ports as soon as it loads windows. when i go to the device manager, i see 1 usb controller with the yellow i con next to it.. but when i uninstal it, check for hardware changes.. it install's, and works fine. its just on each new start of the pc its disabled the biggest problem is... my mouse and keyboard are USB.. so I have a 2nd mouse over here atm to instal the USB controller. But.. can anyone help me on this one? I really dont know what i could do about it. __________________ Newton is dead, Einstein is dead, I don't feel very well either Xfire - Mirrari Intel Q6600 ( @3.6GHz) Asus Triton 79 Amazing 549/3200 4x 1Gb Corsair XMS2 DDR800 ( @ 960MHz ) Asus Maximus Formula Asus & Sapphire HD3870 512Mb Corsair HX620W PSU

11-04-2006, 10:47 PM	#4 (permalink)
Archangel Moderator Join Date: Jan 2005 Location: Netherlands Age: 21 Posts: 7,868	stupid question... what is the event viewer, and where do i find it? :x As for the devices,.. my keyboard, my mouse (well, trackball) and the Creative IR remote reciever that came with my soundcard. ( but it does the same when i remove it) edit: the funny thing is tough.. i can use the USB keyboard in the bios and all,.. it also recognizes the Keyboard, mouse and hub (build into the keyboard) in the bios.. to its really just windows messing around __________________ Newton is dead, Einstein is dead, I don't feel very well either Xfire - Mirrari Intel Q6600 ( @3.6GHz) Asus Triton 79 Amazing 549/3200 4x 1Gb Corsair XMS2 DDR800 ( @ 960MHz ) Asus Maximus Formula Asus & Sapphire HD3870 512Mb Corsair HX620W PSU

11-04-2006, 11:06 PM	#6 (permalink)
Archangel Moderator Join Date: Jan 2005 Location: Netherlands Age: 21 Posts: 7,868	Oh my... there is a load of errors in there.. ( but i cant find any related to usb.. ) well,.. ive been messing around, looking if i could find something.. so i'll reboot the pc, and see what error's are there then. (I assume thats what you mean? ) __________________ Newton is dead, Einstein is dead, I don't feel very well either Xfire - Mirrari Intel Q6600 ( @3.6GHz) Asus Triton 79 Amazing 549/3200 4x 1Gb Corsair XMS2 DDR800 ( @ 960MHz ) Asus Maximus Formula Asus & Sapphire HD3870 512Mb Corsair HX620W PSU

11-05-2006, 12:05 AM	#10 (permalink)
Cromewell Moderator Join Date: Dec 2004 Location: Canada Age: 24 Posts: 10,085	It's odd that it's not working by default but open Component Services (Control Panel->Administrative Tools). Expand the Component Services section, expand computers, right click on My Computer and pick properties. Go to the com security tab and click 'edit default' in the launch and activation premissions section. Check that system and interactive have both locals checked and Administrators have everythign checked. If that doesn't work add user NT AUTHORITY and grant it Local Activation and Local Launch. __________________ You know what the chain of command is? It's the chain I go get and beat you with 'til ya understand who's in ruttin' command here. I must plug a couple comics because they are good :D: www.ctrlaltdel-online.com www.userfriendly.org

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-04-2006, 10:36 PM	#2 (permalink)
PC eye Diamond Member Join Date: Apr 2006 Location: Inside a pc Posts: 19,226	Are you seeing an error messages? Make sure the usb controllers are enabled in the bios. Here's a pair of links that also refer go into this. That seems the most likely cause there. http://www.intel.com/support/periphe.../cs-011939.htm http://www.microsoft.com/whdc/archive/usbcompat.mspx

11-04-2006, 10:37 PM	#3 (permalink)
tlarkin VIP Member Join Date: Apr 2006 Location: Kansas City, MO Posts: 6,056	what does the event viewer say? What usb devices are all plugged in at boot up?

11-04-2006, 10:53 PM	#5 (permalink)
tlarkin VIP Member Join Date: Apr 2006 Location: Kansas City, MO Posts: 6,056	Your BIOS will control your onboard USB controller before windows boots and takes over, that is normal behavior. To access the event viewer (there is more than one way) click Start > Right click My computer > Manage > Event Viewer > System Log Any errors relating to USB? you can also access it via control panles > Administrative Tools > Computer Management > event viewer

11-04-2006, 11:09 PM	#7 (permalink)
tlarkin VIP Member Join Date: Apr 2006 Location: Kansas City, MO Posts: 6,056	some errors are normal, like DHCP release/renew errors, and windows defender keeps calling my VNC connection spyware, even though its something I installed myself LOL Make sure your USB is in working manner, then reboot the system, if the errors persist something in event viewer may pop up. However, windows error logs lack a lot of good info.

11-04-2006, 11:58 PM	#9 (permalink)
tlarkin VIP Member Join Date: Apr 2006 Location: Kansas City, MO Posts: 6,056	do you have a usb card reader installed? the CLSID error has to do with UUIDs, and the class ID is a reg key that is trying to connect with some local service. UUIDs are specific indentifers on hardware. Similar to a MAC address on a NIC. CLSID is just another name for it. see this: http://en.wikipedia.org/wiki/Globally_Unique_Identifier Have you recently installed any kind of new usb controller or ran any updates for drivers/firmware? It looks like you have an onboard and a PCI USB controller...Does the problem persist when you yank the PCI USB card out? Or have you recenlty added any new USB devices? Perhaps you have a bonofied GUID conflict, which technically isn't suppose to happen.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need PROFESSIONAL help on buying a new computer.	audiobahn1000	Desktop Computers	21	08-21-2006 11:18 PM
external usb hard drive - im lost	AdamTheGreat	Computer Memory and Hard Drives	0	12-19-2005 03:17 AM
USB Firelite External Hard drive	roxcyn	Computer Accessories	0	12-18-2005 05:25 PM
Burned USB drive... bad motherboard?	Waffa	Motherboards	3	06-20-2005 03:13 PM
Combine an USB mouse and hard drive...?	Grolyn	Computer Accessories	5	01-16-2005 07:12 AM