front I/O ports?

lethalforce · 11-09-2006, 04:35 PM

on my case i have 4 front ports, 2 usb and 2 audio (mic and headphone) but when i try to plug them into my mobo the names dont mach the ones in the instruction book or on the wire themselves! they matched up for the "power led' and all that but when im trying to plug in the audio ports the wires has a diffrent name han the little prongs on the board...so what should i do?

http://www.newegg.com/product/produc...82E16811147026

http://www.newegg.com/product/produc...82E16813130056

**apj101** · 11-09-2006, 04:38 PM

list all the names here, im sure we can figure them out

lethalforce · 11-09-2006, 04:46 PM

front panel audio connetors:

1-mic in(R)
2-GND
3-MIC POWER (L)(ORNAGE)
4-LINE OUT FR (RED)
5-LINE OUT RR (BLUE)
6-LINE OUT FL (WHITE)
7-LINE OUT RL (YELLOW)

my mobos JAUD1 audio inputs:

1- (2)gnd
2- (1) port 1L
3- port 1R
4- port 2R
5- sene_send
6- port 2L(9)
7- sense2_return(10)
8- key
9- sense1_return
10- presence#

these obviously don't match, any ideas? i'm so frustrated right now

**apj101** · 11-09-2006, 05:26 PM

For Intel® High Definition Front Panel Audio
Pin Signal Name Description
1 PORT 1L Analog Port 1 - left channel (Microphone)
2 GND Ground
3 PORT 1R Analog Port 1 - right channel (Microphone)
4 PRESENCE# Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel® HD Audio dongle is connected
5 PORT 2R Analog Port 2 - right channel (Headphone)
6 SENSE1_RETURN Jack detection return for front panel (JACK1)
7 SENSE_SEND Jack detection sense line from the Intel® HD Audio CODEC jack detection resistor network
8 KEY Connector key
9 PORT 2L Analog Port 2 - left channel (Headphone)
10 SENSE2_RETURN Jack detection return for front panel (JACK2)

so try
1-mic in(R) goto 1
2-GND goto 2
3-MIC POWER (L)(ORNAGE) goto 3
4-LINE OUT FR (RED) goto 5
5-LINE OUT RR (BLUE) emtpy
6-LINE OUT FL (WHITE) goto 9
7-LINE OUT RL (YELLOW) empty

only the front left and right speaker will work

lethalforce · 11-09-2006, 05:38 PM

okay here's the problem, i was reading off the instruction manual for my case which is giving me the wrong wires names!

here's the names of the wires straight off the wire not the book

mic in (R) GND <-- 1 wire

line out FL <-- 1 wire
line out RL <---/

line out FR <-- 1 wire
LINE out RR <-- /

mic power (L) <- 1 wire

so when trying to do your suggestion i cant, because some of them are 2 pronged wires that you are telling me must go into a 1 pronged connection

thanks for you help so far by the way

!!

**apj101** · 11-09-2006, 07:22 PM

im sorry but which are 2 pronged, can you take a pic.... im sure we can figure this out.

lethalforce · 11-09-2006, 07:48 PM

**apj101** · 11-09-2006, 09:53 PM

my orginal suggestion should still work... i drew a pretty picture

lethalforce · 11-10-2006, 12:52 AM

wow it worked! thanks man!!!

i just wonder why they didnt have the same names...

**apj101** · 11-11-2006, 12:57 PM

they are made for different standards.....

glad i could help out

11-09-2006, 04:35 PM	#1 (permalink)
lethalforce Gold Member Join Date: Nov 2005 Posts: 382	front I/O ports? on my case i have 4 front ports, 2 usb and 2 audio (mic and headphone) but when i try to plug them into my mobo the names dont mach the ones in the instruction book or on the wire themselves! they matched up for the "power led' and all that but when im trying to plug in the audio ports the wires has a diffrent name han the little prongs on the board...so what should i do? http://www.newegg.com/product/produc...82E16811147026 http://www.newegg.com/product/produc...82E16813130056 __________________ cpu: AMD Athlon™ 64x2 dual-core processor hdd: Seagate Barracuda 200GB 7200 RPM ram: 1280mb corsair value ram videocard:BFG geforce 7900gt <-god mobo: ECS RS480-M V1.0 Micro ATX case: Antec SUPER LANBOY

11-09-2006, 04:38 PM	#2 (permalink)
apj101 Administrator Join Date: Apr 2005 Location: London Age: 26 Posts: 9,147	list all the names here, im sure we can figure them out __________________ What did one snow man say to the other? can you smell carrot? The fight is won or lost far away from witnesses - behind the lines, in the gym, and out there on the road, long before I dance under those lights. How you do anything, is how you do everything!

11-09-2006, 04:46 PM	#3 (permalink)
lethalforce Gold Member Join Date: Nov 2005 Posts: 382	front panel audio connetors: 1-mic in(R) 2-GND 3-MIC POWER (L)(ORNAGE) 4-LINE OUT FR (RED) 5-LINE OUT RR (BLUE) 6-LINE OUT FL (WHITE) 7-LINE OUT RL (YELLOW) my mobos JAUD1 audio inputs: 1- (2)gnd 2- (1) port 1L 3- port 1R 4- port 2R 5- sene_send 6- port 2L(9) 7- sense2_return(10) 8- key 9- sense1_return 10- presence# these obviously don't match, any ideas? i'm so frustrated right now __________________ cpu: AMD Athlon™ 64x2 dual-core processor hdd: Seagate Barracuda 200GB 7200 RPM ram: 1280mb corsair value ram videocard:BFG geforce 7900gt <-god mobo: ECS RS480-M V1.0 Micro ATX case: Antec SUPER LANBOY Last edited by lethalforce; 11-09-2006 at 04:50 PM.

11-09-2006, 05:26 PM	#4 (permalink)
apj101 Administrator Join Date: Apr 2005 Location: London Age: 26 Posts: 9,147	For Intel® High Definition Front Panel Audio Pin Signal Name Description 1 PORT 1L Analog Port 1 - left channel (Microphone) 2 GND Ground 3 PORT 1R Analog Port 1 - right channel (Microphone) 4 PRESENCE# Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel® HD Audio dongle is connected 5 PORT 2R Analog Port 2 - right channel (Headphone) 6 SENSE1_RETURN Jack detection return for front panel (JACK1) 7 SENSE_SEND Jack detection sense line from the Intel® HD Audio CODEC jack detection resistor network 8 KEY Connector key 9 PORT 2L Analog Port 2 - left channel (Headphone) 10 SENSE2_RETURN Jack detection return for front panel (JACK2) so try 1-mic in(R) goto 1 2-GND goto 2 3-MIC POWER (L)(ORNAGE) goto 3 4-LINE OUT FR (RED) goto 5 5-LINE OUT RR (BLUE) emtpy 6-LINE OUT FL (WHITE) goto 9 7-LINE OUT RL (YELLOW) empty only the front left and right speaker will work __________________ What did one snow man say to the other? can you smell carrot? The fight is won or lost far away from witnesses - behind the lines, in the gym, and out there on the road, long before I dance under those lights. How you do anything, is how you do everything!

11-09-2006, 05:38 PM	#5 (permalink)
lethalforce Gold Member Join Date: Nov 2005 Posts: 382	okay here's the problem, i was reading off the instruction manual for my case which is giving me the wrong wires names! here's the names of the wires straight off the wire not the book mic in (R) GND <-- 1 wire line out FL <-- 1 wire line out RL <---/ line out FR <-- 1 wire LINE out RR <-- / mic power (L) <- 1 wire so when trying to do your suggestion i cant, because some of them are 2 pronged wires that you are telling me must go into a 1 pronged connection thanks for you help so far by the way !! __________________ cpu: AMD Athlon™ 64x2 dual-core processor hdd: Seagate Barracuda 200GB 7200 RPM ram: 1280mb corsair value ram videocard:BFG geforce 7900gt <-god mobo: ECS RS480-M V1.0 Micro ATX case: Antec SUPER LANBOY

11-09-2006, 07:22 PM	#6 (permalink)
apj101 Administrator Join Date: Apr 2005 Location: London Age: 26 Posts: 9,147	im sorry but which are 2 pronged, can you take a pic.... im sure we can figure this out. __________________ What did one snow man say to the other? can you smell carrot? The fight is won or lost far away from witnesses - behind the lines, in the gym, and out there on the road, long before I dance under those lights. How you do anything, is how you do everything!

11-09-2006, 07:48 PM	#7 (permalink)
lethalforce Gold Member Join Date: Nov 2005 Posts: 382	__________________ cpu: AMD Athlon™ 64x2 dual-core processor hdd: Seagate Barracuda 200GB 7200 RPM ram: 1280mb corsair value ram videocard:BFG geforce 7900gt <-god mobo: ECS RS480-M V1.0 Micro ATX case: Antec SUPER LANBOY

11-09-2006, 09:53 PM	#8 (permalink)
apj101 Administrator Join Date: Apr 2005 Location: London Age: 26 Posts: 9,147	my orginal suggestion should still work... i drew a pretty picture __________________ What did one snow man say to the other? can you smell carrot? The fight is won or lost far away from witnesses - behind the lines, in the gym, and out there on the road, long before I dance under those lights. How you do anything, is how you do everything!

11-10-2006, 12:52 AM	#9 (permalink)
lethalforce Gold Member Join Date: Nov 2005 Posts: 382	wow it worked! thanks man!!! i just wonder why they didnt have the same names... __________________ cpu: AMD Athlon™ 64x2 dual-core processor hdd: Seagate Barracuda 200GB 7200 RPM ram: 1280mb corsair value ram videocard:BFG geforce 7900gt <-god mobo: ECS RS480-M V1.0 Micro ATX case: Antec SUPER LANBOY

11-11-2006, 12:57 PM	#10 (permalink)
apj101 Administrator Join Date: Apr 2005 Location: London Age: 26 Posts: 9,147	they are made for different standards..... glad i could help out __________________ What did one snow man say to the other? can you smell carrot? The fight is won or lost far away from witnesses - behind the lines, in the gym, and out there on the road, long before I dance under those lights. How you do anything, is how you do everything!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front Audio port not working	Speirs	Desktop Computers	1	06-09-2006 09:52 PM
Help Connecting Front Audio Ports	runbird05	Sound Cards and Speakers	5	08-21-2005 06:08 PM
Cases and front Ports	Phippsp	Computer Cases, Power Supplies and Cooling	5	02-02-2005 11:16 PM
Front USB ports	double-dragon	Computer Accessories	8	01-10-2005 05:41 PM
Help to enable Mic and headphone ports on Front panel	moonorb_xion	Sound Cards and Speakers	2	10-08-2004 09:52 AM