can't get hp vectra p200Mhz to recognize new 40gb drive

cmartin2 · 02-09-2005, 06:36 AM

I recently installed a new 40gb drive using the 2nd 40pin socket on the ide hard drive ribbon cable. I didn't set the jumper for new drive because it did not have its own controller. When I rebooted the system I received the error: ide device #1 Error. I am running windows 2000 server. The BIOS IS PhoenixBIOS Version 4.05.1. When I set Device #1 in configuration section to [Auto] to get the computer to recognize the drive, I still get same error. Any help in getting the system to recognize drive would be appreciated thank you. cmartin2

02-09-2005, 06:36 AM	#1 (permalink)
cmartin2 New Member Join Date: Feb 2005 Posts: 1	can't get hp vectra p200Mhz to recognize new 40gb drive I recently installed a new 40gb drive using the 2nd 40pin socket on the ide hard drive ribbon cable. I didn't set the jumper for new drive because it did not have its own controller. When I rebooted the system I received the error: ide device #1 Error. I am running windows 2000 server. The BIOS IS PhoenixBIOS Version 4.05.1. When I set Device #1 in configuration section to [Auto] to get the computer to recognize the drive, I still get same error. Any help in getting the system to recognize drive would be appreciated thank you. cmartin2

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode