ComputerForum.com ComputerForum.com  
Go Back   Computer Forum > Computer Software > Operating Systems

Reply
 
LinkBack Thread Tools Display Modes
Old 05-18-2007, 02:16 AM   #1 (permalink)
Gold Member
 
WeatherGeek's Avatar
 
Join Date: Dec 2006
Posts: 265
Default Takes FOREVER to startup after Power out

My PC was on and the power went out, now, it takes a very long time for windows to load

I am running Vista. The power went out briefly today and shut down the PC. Now, when i turn on the PC, i see the mobo screen, then it goes to the windows vista green moving bars loading screen, then goes to a black screen and stays there for about 5 mins! Then it goes to the vista logon screen. Whats going on???
__________________

Mobo: MSI P6N SLI Platinum nForce 650i ATX
RAM: 2gb Patriot eXtreme Performance DDR2 800
CPU: Intel Core 2 Duo E6600 Conroe OC to 3.21GHz
PSU: XCLIO GreatPower 550watt
HDD: Seagate Barracude 320gb 16MB Cache SATA 3.0
Case: NZXT Apollo Silver ATX Steel
Graphics Card: EVGA 8800GTS 640MB SuperClocked

3DMark06: 10,367 Marks
WeatherGeek is offline   Reply With Quote


Old 05-18-2007, 02:24 AM   #2 (permalink)
Diamond Member
 
PC eye's Avatar
 
Join Date: Apr 2006
Location: Inside a pc
Posts: 19,730
Default

Boot from the installation disk and instead of looking at the "install now" option look down to the repair options when booting from the disk. In there Vista now has an automatic repair tool for startup problems. If you had something running at the time it may have caused a Windows or other startup glitch. That will get you past the problem until you isolate the cause.
__________________
Turning the Tongue into a Device Controller
http://abcnews.go.com/Technology/Sma...ory?id=5647175

Is EBay going out of the Auction Business?
http://abcnews.go.com/Business/story?id=5626840&page=1
PC eye is offline   Reply With Quote
Old 05-18-2007, 03:01 AM   #3 (permalink)
Gold Member
 
WeatherGeek's Avatar
 
Join Date: Dec 2006
Posts: 265
Default

Thanks. Just tried it, found no startup errors. tried to do a sys. restore to yesterday, but it didnt fix the issue
__________________

Mobo: MSI P6N SLI Platinum nForce 650i ATX
RAM: 2gb Patriot eXtreme Performance DDR2 800
CPU: Intel Core 2 Duo E6600 Conroe OC to 3.21GHz
PSU: XCLIO GreatPower 550watt
HDD: Seagate Barracude 320gb 16MB Cache SATA 3.0
Case: NZXT Apollo Silver ATX Steel
Graphics Card: EVGA 8800GTS 640MB SuperClocked

3DMark06: 10,367 Marks
WeatherGeek is offline   Reply With Quote
Old 05-18-2007, 04:56 AM   #4 (permalink)
Diamond Member
 
PC eye's Avatar
 
Join Date: Apr 2006
Location: Inside a pc
Posts: 19,730
Default

The problem may be with something loading along with Windows rather then with Windows itself. If the sudden stop saw a 3rd party software corrupted somehow you would probably end up trying to boot in safe mode to see if that will load up normally then. The other thing to start looking at is any devices like a printer attached or possible hardware damage in the case itself from a line surge at that time. Once booted in asfe mode try using the msconfig to reduce startups as well as unplugging any external devices.
__________________
Turning the Tongue into a Device Controller
http://abcnews.go.com/Technology/Sma...ory?id=5647175

Is EBay going out of the Auction Business?
http://abcnews.go.com/Business/story?id=5626840&page=1
PC eye is offline   Reply With Quote
Old 05-18-2007, 08:28 PM   #5 (permalink)
Gold Member
 
WeatherGeek's Avatar
 
Join Date: Dec 2006
Posts: 265
Default

Doesnt look like any visible damage.

My motherboard screen takes longer to go away as well. Its up for about 1 min, + 3 mins for that black screen that's empty.

Whats going on?
__________________

Mobo: MSI P6N SLI Platinum nForce 650i ATX
RAM: 2gb Patriot eXtreme Performance DDR2 800
CPU: Intel Core 2 Duo E6600 Conroe OC to 3.21GHz
PSU: XCLIO GreatPower 550watt
HDD: Seagate Barracude 320gb 16MB Cache SATA 3.0
Case: NZXT Apollo Silver ATX Steel
Graphics Card: EVGA 8800GTS 640MB SuperClocked

3DMark06: 10,367 Marks
WeatherGeek is offline   Reply With Quote


Old 05-19-2007, 02:21 AM   #6 (permalink)
Diamond Member
 
PC eye's Avatar
 
Join Date: Apr 2006
Location: Inside a pc
Posts: 19,730
Default

It may not be so much from the sudden shutdown but the sudden surge when the power was restored. Sometimes when you see power come back on when knocked out you will notice more then blink and then it finally looks normal again. That's a multiple surge when it startts drops a little and then comes back strong when restored. That's the time to leave things off.

You won't always see visible damage unless you inspect the board itself and see any discoloted spots there or any bulged or leaking caps. With the sudden loss hte bios programming namely cmos information may have become somewhat corrupted? Then it may be being seen now since the battery on the board itself has grown weak. That's rare on a newer build. The last item of course would be a supply problem since post time sees the greatest demand there for power. If the supply is now seeing a weak cap the demand would pull the power level down.
__________________
Turning the Tongue into a Device Controller
http://abcnews.go.com/Technology/Sma...ory?id=5647175

Is EBay going out of the Auction Business?
http://abcnews.go.com/Business/story?id=5626840&page=1
PC eye is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Power Schemes SAAER45 Laptop and Handheld Computers 1 02-18-2007 05:04 AM
Power Supply or Motherboard? rburcky Computer Cases, Power Supplies and Cooling 5 01-10-2006 03:13 AM
HP Power Supply Help PLEASE *Kinda Long* TidalWaveTiburon Computer Cases, Power Supplies and Cooling 5 12-16-2005 02:56 PM
What Power Supply Needed?? PLZ Help!! PhillipAndrews Computer Cases, Power Supplies and Cooling 7 03-17-2005 03:49 PM

All times are GMT +1. The time now is 04:24 PM.


Powered by: vBulletin Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0 ©2008, Crawlability, Inc.
Copyright © 2002-2008 Computer Forum and Web Design Forum