As far as the Sata 0 connection that shouild also be seen as the primary master with Sata 1 as the primary slave. With more then two ports like 4, 6, or 8 you then see secondary master or slave according to the port used.
In the bios not noot order but intregrated peripherals or similar the hard drive item when highlighted and the enter ksy is pressed a list of all hard drives is seen in the screen that comes up where you move the intended OS host drive to the top of that. Then when the hard drive is set as first in the boot order that becomes the default boot drive there.
The drive plugged in now will see Window go on there and may have ot be moved again to the top of the list once the other drive is plugged back in afterwards. Sometimes even while on a second port one displaces the other as first there. But the thing that may be the problem for you is having the Lite-On ide drive's jumper set wrong like master if plugged into the middle connector or slave or cable select if plugged in on the end connector needing to see that moved to the master position.
|