Post your SuperPi Score!
- Thread starter Geoff
- Start date
- Status
mikesrex
New Member
I just run my i7-920 at stock clock to get a superpi 1M result of 14.9 seconds. I wonder why yours does 17.
Bodaggit23
Active Member
Not sure either. I'll check it again if I ever unclock it. I could be mistaken.
Ramodkk
VIP Member
Even if they're the same CPU, they're not going to perform the same. 15 seconds to 17 seconds is a reasonable gap, even for identical CPU's.
Bodaggit23
Active Member
The only thing I can come up with is that I used an older version of SuperPi
the very first time I ran it.
The first time I ran it stock, I got this:
http://i158.photobucket.com/albums/t113/Motovader72/Stock.jpg
I just ran it again at stock and got this:
http://i158.photobucket.com/albums/t113/Motovader72/Stock2.jpg
I am still in the process of overclocking, but i don't want to go much further without getting an after market heatsink, so expect another one a little further down the line
I know it is hard to make out, but i am running an E6750 at 3.1GHz (stock is 2.66GHz)
I ran my E6750 @ 3.8 ghz with a stock heatsink and fan.
Aastii
VIP Member
I am considering getting it higher, but i am now at 50 degrees idle, but, this is confusing me, even when gaming it doesn't raise any higher
If i stress test though it gets to 75 degrees which is a little worrying
bubblescivic
New Member
[-0MEGA-];1236762 said:
it's been a while since mike posted his 9.015
seems like you would update it by now
Candy
New Member
Can you tell me what settings that was at? As in what voltages, and did you have to overclock your memory?
Also did you stress test? I can't get mine past about 5 min on Prime95 at 3.6, so I'm obviously doing something wrong.
Aastii
VIP Member
you are not necessarily doing anything wrong, every chip is different, you may not be able to push yours as far as he has without losing stability or without whacking voltages up more than he has to
Here is my result with super pi mod though, pissed at how close to sub 16 i was
[/IMG]
Last edited:
MIK3daG33K
New Member
Damn! I just missed the update. CPU 3.4 Ghz
Geoffrey70
New Member
- Status