Would like some help with finding the right GPU upgrade,never shoped for one.

I want to upgrade my graphics card.Why you ask?Im geting tired of videos(youtube & movies) laging even when it shows they are buffered out.And I know its probly not possible on this computer,but I would like to run playstation 2.
I can run ps1 just fine,but ps2 having more trouble.I will give you the specs I think you will probly ask for.Sorry if its TMI.
But I want to make sure I get the right type & one that would be worth buying.

Cpu4 1.6ghz(1594.83MHz)
Power supply:160w output

Here is copys from pc wizard.

Slots Information :
Slot PCI : 32-bit [3.3v] - Empty
Slot PCI : 32-bit [3.3v] - Empty
Slot PCI : 32-bit [3.3v] - Empty
Slot AGP 4X :32-bit [5.0v] - In Use

General Information :
Number of PCI Bus : 3
Number of PCI Connectors :3

Peripheral Type :
Device 1, Bus 0 :AGP
Device 1, Bus 1 :AGP

General Features :
Support PCI Mechanism 1 :Yes

Bus Information #0 :
Device :82845/E/MP/MZ Chipset CPU to I/O Bridge
Device :82845/E/MP/MZ Chipset CPU to AGP Bridge
Device :82801 Family (ICH2/3/4/5/6/7/8/9/10/11,63xxESB) Hub Interface to PCI Bridge
Device :82801BA (ICH2) LPC Interface Controller
Device :82801BA (ICH2) PATA Controller
Device :82801BA/BAM (ICH2/ICH2-M) USB UHCI Controller #1
Device :82801BA/BAM (ICH2/ICH2-M) SMBus Controller
Device :82801BA/BAM (ICH2/ICH2-M) USB UHCI Controller #2
Device :82801BA/BAM (ICH2/ICH2-M) AC'97 Audio Controller

Bus Information #1 :
Device :GeForce2 MX 100/200 (DDR) [NV11DDR]

Bus Information #2 :
Device :82801BA/CAM (ICH2/3) LAN Controller

Ram:
General Information :
J5G3 (RAS 0, RAS 0) :256 (Single Bank)
J5G1 (RAS 0, RAS 0) :256 (Single Bank)

Information SPD EEPROM (J5G3) :
Manufacturer :Infineon
Part Number :64D32300GU6C
Serial Number :030B5C24
Type DR-SDRAM PC-2700 (166MHz) - [DDR-333]
Size :256MB (1 rows, 4 banks)
Module Buffered :No
Module Registered :No
Module SLi Ready (EPP) :No
Width :64-bit
Error Correction Capability (EC...No
Max. Burst Length : 8
Refresh :Reduced (.5x)7.8 µs, Self Refreshµs
Voltage :SSTL 2.5vv
Prefetch Buffer :2-bit
Manufacture :Week 41of2004
Supported Frequencies :133MHz, 166MHz
CAS Latency (tCL) : 2 clocks @ 133MHz, 2.5 clocks @ 166MHz
RAS to CAS (tRCD) :3 clocks @ 133MHz, 3 clocks @ 166MHz
RAS Precharge (tRP) :3 clocks @ 133MHz, 3 clocks @ 166MHz
Cycle Time (tRAS) : 6 clocks @ 133MHz, 7 clocks @ 166MHz

Information SPD EEPROM (J5G1) :
Manufacturer :Kingston
Part Number :K
Serial Number :08054201
Type DR-SDRAM PC-2300 (142MHz) - [DDR-285]
Size :256MB (1 rows, 4 banks)
Module Buffered :No
Module Registered :No
Module SLi Ready (EPP) :No
Width :64-bit
Error Correction Capability (EC...No
Max. Burst Length : 8
Refresh : Reduced (.5x)7.8 µs, Self Refreshµs
Voltage : SSTL 2.5vv
Prefetch Buffer :2-bit
Manufacture :Week 31of2002
Supported Frequencies :133MHz, 142MHz
CAS Latency (tCL) : 2 clocks @ 133MHz, 2.5 clocks @ 142MHz
RAS to CAS (tRCD) :3 clocks @ 133MHz, 3 clocks @ 142MHz
RAS Precharge (tRP) :3 clocks @ 133MHz, 3 clocks @ 142MHz
Cycle Time (tRAS) : 6 clocks @ 133MHz, 7 clocks @ 142MHz

Memory Controller Information :
Memory Controller : ECC, DIMM, SDRAM
Number of connectors :2
Max. Module Size :1024MB
Max. Memory Size :2048MB
Supported Speed :50ns
Supported Voltages :3.3v
Error Detection Method :32-bit ECC
Error Correction Capability :Single Bit
Current/Supported Interleave :1-way/1-way

Chipset-intel i845D:
General Information :
NorthBridge :Intel i845D
SouthBridge :82801BA (ICH2) LPC Interface Controller

NorthBridge Information :
Architecture :HUB
Manufacturer :Intel
Codename :Brookdale
Revision : B0
Bus Speed :99.7MHz
FSB Frequency :398.7MHz (QDR)
FSB max. Support : 400MHz
RAM max. Support : DDR (266MHz)

Memory Information :
Type DR-SDRAM PC-2100
Frequency :132.9MHz
DRAM/FSB Ratio :4/3
Supported Channels :Single
ECC Diagnostic :Yes - Disabled
CAS Latency (tCL) : 2 clocks
RAS to CAS (tRCD) :3 clocks
RAS Precharge (tRP) :3 clocks
Cycle Time (tRAS) : 6 clocks

Bus Information :
Version :2.0
Transfert Rate supported :1x, 2x, 4x
Transfert Rate :4x
Aperture Size :64MB
Side Band supported :Yes
Side Band enabled : No
AGP enabled :Yes

APIC Information :
Version : 2.00
Maximum Interrupts :24
IRQ Handler enabled :Yes

Hub Interface Information :
Version :1.00
Time Slice :0
Width :8-bit
Full Duplex :Yes
Frequency :4x (264MHz)
Multiplier : 1/1x

Device Capabilities (PCI) :
I/O Access :No
Memory Access :Yes
Bus Master Capable :Yes
Special Cycle Recognition :No
Memory Write & Invalidate :No
VGA Palette Snoop : No
Parity Error Response :No
Cycle Wait :No
System Error Line :Yes
Fast Back-to-Back : No
Detects Parity Errors :No
User Defined Format :No
PCI 66Mhz Bus Support :No
New Capability List : Yes
PCI Support :Vendor-Dependant
PCI Support :AGP

I know im probly very limited.May get 2gb of ram if I can afford it.

Upgrading the video card probably won't keep youtube from lagging.. running on a 1.6Ghz processor with SDRam is your problem. At this point, I'd suggest keeping an eye out on craigslist for a newish computer, I really wouldn't 'invest' anymore money into this thing.. save up for something else.

$.02

bullzi said:

Upgrading the video card probably won't keep youtube from lagging.. running on a 1.6Ghz processor with SDRam is your problem. At this point, I'd suggest keeping an eye out on craigslist for a newish computer, I really wouldn't 'invest' anymore money into this thing.. save up for something else.

$.02

Click to expand...

I had a feeling this would be said lol.Im not geting another pc anytime soon.Unless someone has a complete dualcore working tower for $60 lol.
Would either of these work & be a decent upgrade?And if so,which would be beter?
ATI Radeon 9200
http://cgi.ebay.com/ATI-Radeon-9200...853?pt=PCC_Video_TV_Cards&hash=item4cf4013b0d
PNY NVIDIA GeForce FX5200
http://cgi.ebay.com/PNY-NVIDIA-GeFo...286?pt=PCC_Video_TV_Cards&hash=item4aa7543f9e

Well it doesn't need to be a dual core, for $60 you could at least find something quite a bit better on craigslist or eBay. Of those two, the 9200 has barely better performance.

With a Dell 160w PSU, you'd blow it up if you plug in too many usb devices, let alone a respectable GPU. Sorry, but your computer is a lot more trouble than its worth to upgrade. You likely could find something better for your budget used, it won't be good, but it could be a huge improvement lol. Your computer is a dead end, and if you get a graphics card and put in it, you won't have any computer at all and you'll have wasted the only pocket money you have. Time to start pinching pennies bud.

Yea, honestly you're just wasting money and time on this computer. I'd sell this one on craigslist, I guarantee there's something better on there you could buy.. this thing just isn't worth spending another dollar on.

Ok ill take your guys input and give 2 thumbs down on geting a new card.I will probly have this junker for a lil while.Im currently unemployed.It does fine for me for what I usualy do on computers,just sucks when it comes to games.I guess ill just add a new HD for it since im down to 4.2GB.Which won't last long at all for me lol.When I get a new pc,ill just take it out when I throw this pc to the curb.Thank you all for your help,its very much appreciated .