Post A Pic Of Your Pc Here :)
- Thread starter jancz3rt
- Start date
Ramodkk
VIP Member
Damn son, I know I've said it on FB
but easily the cleanest inside I've seen on a Mid-ATX. :good:I love my Lian-Li but it's getting close to that time when I wanna switch cases, those Fractal Designs look mad sexy!
S.T.A.R.S.
banned
Next reply will contain very first pictures...
Believe it or not,my first pictures of the UAC data device are being uploaded right now!!!
There are totally 10 pictures I have taken.
The pictures were NOT taken in my main UAC data complex center working environment room.Instead I have taken the pictures in my kitchen!
The pictures were taken with my digital camera OLYMPUS C-120.I know it's an older digital camera,but the quality of the pictures is still awesome!
NOTE: The following 10 pictures show ONLY the UAC data device and nothing else.The rest I will show you in the music video as promised.
Anyway...
I apologize for keeping you wait FOR SUCH A LONG TIME.
I feel like an asshole hahaha!But I am not lol.
Everything I have told you is 100% true.
The reason why it took me such a long time is because I had SO SO SO MUCH work to do on SO SO SO MANY things.The UAC data device is just ONE of the many things I had to do.
Not to mention that during this LONG AND HARD PERIOD OF WORK many things got complicated where they were not supposed to get complicated and where I did not expect them to get complicated lol.
Unforcenately it DID GET COMPLICATED ANYWAY lol...
I guess that's just my luck hahaha!
Anyway...what you are about to see on the following 10 pictures WHICH ARE FINALLY BEING UPLOADED RIGHT FREAKING NOW AS I AM WRITING THIS is ONLY the UAC DATA DEVICE.
The reason why I was not able to show you the pictures of the UAC data device BEFORE was because the UAC data device was the LAST THING I had to make AFTER I HAVE FINALLY DONE ABSOLUTELY EVERYTHING ELSE.And that "ABSOLUTELY EVERYTHING ELSE" was a LOT LOT LOT OF WORK.
Trust me...a lot......too much actually lol...!
And once I have finally made the UAC data device...guess what...things got complicated AGAIN!
First it was the POWER ISSUE I had to fix.For some reason it worked fine in the beginning and later it did not...what an irony ha?
So I had modify the entire damn UAC data device just to add the additional power.
Then the damn BLUE LED on one of the fans suddenly stopped working.It was flashing on and off for few hours and then in just died.And it was brand new!What an irony ha?
So I had disassemble the entire damn UAC data device just to replace the damn blue led.By this point I was already pissed off lol!!!
Then few MOLEX TO SATA WIRES all of a sudden were not working properly,but at the beginning they did.The contact was just not good anymore.And the damn wires were brand new!What an irony ha?
So I had disassemble the entire damn UAC data device just to replace the damn wires!By this point I was already pissed off SOOOOO MUCH lol!!!
Then after some time it appeared that the damn HUB was completely malfunctioned.And (as everything else) it was brand new!What an irony ha?
So I had disassemble the entire damn UAC data device just to replace the damn hub!By this point I wanted to kill someone hahaha!!!
And a lot more.......seriously...a LOT LOT LOT more lol...
After I have FINALLY finished the UAC data device ONCE AND FOR ALL and when it FINALLY worked the way it was supposed to from the damn beginning then I had to make a software in C# or C++ which I would use to operate the UAC data device with.And this took me another 15 days because I wanted to make it as best as possible in the old .NET version 1.0 so it is compatible all the way back to Windows 98 first edition and later.And I don't even have to mention how many damn bugs occured while testing the software and how many nerves I lost to fix them and make it work properly lol.
What I am trying to say is that I had so many damn simple things get complicated TOGETHER WITH so many other damn things I had to make in my main UAC data complex center working environment room.And when I say "many" I literally mean MANY!!!
So anyway...this is the reason AND THE ONLY REASON why it took me so long to show you some of my work.
So during all this time WHILE I WAS WORKING ON SO MANY THINGS I was reading comments like:
I must admit that I laughed many times when I was reading that during the past few months lol.
Some of the comments were funny and that's okay lol...,but some were insolting...not really neccessary.
Or should I say "NOT COOL MAN!" hahaha!
Anyway my NEXT REPLY TO THIS THREAD will finally contain the very first pictures of my work I have taken.
Once again I apologize for keeping you wait this long.In this post I tryed my best to explain you why it took me so long.
Once again note that the following 10 pictures you will see will show ONLY the UAC data device and nothing else.The rest I will show you in the music video as promised.
Cheers to everyone!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Believe it or not,my first pictures of the UAC data device are being uploaded right now!!!
There are totally 10 pictures I have taken.
The pictures were NOT taken in my main UAC data complex center working environment room.Instead I have taken the pictures in my kitchen!
The pictures were taken with my digital camera OLYMPUS C-120.I know it's an older digital camera,but the quality of the pictures is still awesome!
NOTE: The following 10 pictures show ONLY the UAC data device and nothing else.The rest I will show you in the music video as promised.
Anyway...
I apologize for keeping you wait FOR SUCH A LONG TIME.
I feel like an asshole hahaha!But I am not lol.
Everything I have told you is 100% true.
The reason why it took me such a long time is because I had SO SO SO MUCH work to do on SO SO SO MANY things.The UAC data device is just ONE of the many things I had to do.
Not to mention that during this LONG AND HARD PERIOD OF WORK many things got complicated where they were not supposed to get complicated and where I did not expect them to get complicated lol.
Unforcenately it DID GET COMPLICATED ANYWAY lol...
I guess that's just my luck hahaha!
Anyway...what you are about to see on the following 10 pictures WHICH ARE FINALLY BEING UPLOADED RIGHT FREAKING NOW AS I AM WRITING THIS is ONLY the UAC DATA DEVICE.
The reason why I was not able to show you the pictures of the UAC data device BEFORE was because the UAC data device was the LAST THING I had to make AFTER I HAVE FINALLY DONE ABSOLUTELY EVERYTHING ELSE.And that "ABSOLUTELY EVERYTHING ELSE" was a LOT LOT LOT OF WORK.
Trust me...a lot...
...too much actually lol...!And once I have finally made the UAC data device...guess what...things got complicated AGAIN!
First it was the POWER ISSUE I had to fix.For some reason it worked fine in the beginning and later it did not...what an irony ha?
So I had modify the entire damn UAC data device just to add the additional power.
Then the damn BLUE LED on one of the fans suddenly stopped working.It was flashing on and off for few hours and then in just died.And it was brand new!What an irony ha?
So I had disassemble the entire damn UAC data device just to replace the damn blue led.By this point I was already pissed off lol!!!
Then few MOLEX TO SATA WIRES all of a sudden were not working properly,but at the beginning they did.The contact was just not good anymore.And the damn wires were brand new!What an irony ha?
So I had disassemble the entire damn UAC data device just to replace the damn wires!By this point I was already pissed off SOOOOO MUCH lol!!!
Then after some time it appeared that the damn HUB was completely malfunctioned.And (as everything else) it was brand new!What an irony ha?
So I had disassemble the entire damn UAC data device just to replace the damn hub!By this point I wanted to kill someone hahaha!!!
And a lot more.......seriously...a LOT LOT LOT more lol...
After I have FINALLY finished the UAC data device ONCE AND FOR ALL and when it FINALLY worked the way it was supposed to from the damn beginning then I had to make a software in C# or C++ which I would use to operate the UAC data device with.And this took me another 15 days because I wanted to make it as best as possible in the old .NET version 1.0 so it is compatible all the way back to Windows 98 first edition and later.And I don't even have to mention how many damn bugs occured while testing the software and how many nerves I lost to fix them and make it work properly lol.
What I am trying to say is that I had so many damn simple things get complicated TOGETHER WITH so many other damn things I had to make in my main UAC data complex center working environment room.And when I say "many" I literally mean MANY!!!
So anyway...this is the reason AND THE ONLY REASON why it took me so long to show you some of my work.
So during all this time WHILE I WAS WORKING ON SO MANY THINGS I was reading comments like:
Cool story Bro.He would have if the thing actually existed...this is what is known as blowing alot of hot air in my neck of the woods
oh and the time frame for star's supposed unveil has come and went. i call BS
I'm one of people
Me to
Ones that are written by a 7 year old especially
I'm not surprised... just pointing it out.
I must admit that I laughed many times when I was reading that during the past few months lol.
Some of the comments were funny and that's okay lol...,but some were insolting...not really neccessary.
Or should I say "NOT COOL MAN!" hahaha!
Anyway my NEXT REPLY TO THIS THREAD will finally contain the very first pictures of my work I have taken.
Once again I apologize for keeping you wait this long.In this post I tryed my best to explain you why it took me so long.
Once again note that the following 10 pictures you will see will show ONLY the UAC data device and nothing else.The rest I will show you in the music video as promised.
Cheers to everyone!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Last edited by a moderator:
claptonman
New Member
Wow, it's actually here. And I have to say, looks pretty cool.
WeatherMan
Active Member
Wait what, it's real?
Jamebonds1
Active Member
No weather, I don't think I trust him. Ever he told about his project without picture. I ask picture of his process, he is refused post picture. All picture he post is some silly picture on his process.
@stars No offensive star but you should have post picture of your process. If I were work on project like building desktop tower, I would post picture of my process. If I keep post of my process without picture then people will mad at me and distrust me. Honestly, I trusted you but you never trust me. You need to sort it out yourself. And you know you have more post than me, there is no reason to make people mad.
S.T.A.R.S.
banned
Wow...I finally gave you the pictures and you still don't trust me.Unbelieveable lol...
Well let's just say that I am one of those people who likes to show things once they are finished 100%.
If I was showing pictures for every single thing which was in process,it would be TOO MANY pictures.
And I hate taking so many pictures lol.
Everything I said before is true AND real.In my previous post I wrote IN RED:
And remember...I always say the truth lol.When I say that I am going to make AND show you something then I will.I just need more time since (as I already said tons of times in my previous posts) I am working on MANY MANY MANY things..........ALONE!
The thing is that I HATE showing something if it's not 100% finished lol.
So...any advices on the black plastic box I should make?
Last edited:
He can do whatever he wants. I doubted he would ever even show us what he looked like. But he did.
S.T.A.R.S.
banned
Geoff
VIP Member
How do you like it? How's the battery life? I'm debating between one of those and a new Surface Pro 2.
Bravo. Now the inside of my case makes me want to weep. Have any pics with the side on?
Gooberman
Active Member
I like the laptop as it can run every game that I own so i can bring it to a friends house instead of the desktop. Battery life isn't the greatest because of the intel gpu is completely disabled. I can get around 2-3 hours which is good enough for me.
lucasbytegenius
Well-Known Member
Can't really see in the pic, but is that a Y500?
Ethan3.14159
Active Member
Haha, thanks. My R4 doesn't have a side window, so it just looks like every other R4 with the side on.
Gooberman
Active Member
yessss