buying used laptop without OS

Darren

Darren

Moderator
Staff member
ugabulldog said:
I am waiting for laptop to be delivered. I am fairly confident I can save windows 10 to a 8gb usb flash drive an another computer, and boot from usb on the laptop...… I looked up the specs for dell E5440 and it says it has a hybrid drive. I am confused on if the highlighted above will apply, and if so, how to go about making sure AHCI is enabled in BIOS? Thanks
Click to expand...
It most likely is already in that mode. As long as you set it to that before you install Windows you'll be fine.
 
U

ugabulldog

Member
Ok, laptop arrived. I am still waiting on usb flash drive.... First off, sticker on back says windows 8 pro, I don't see a product key sticker anywhere.... When I turn on laptop, it says "invalid partition table!" When I hit F2 key when starting, the screen in pic appears, I can scroll thru options with arrows and enter key but mouse curser does not move at all when I use mousepad on laptop?? ...btw, If cursor should be moving, please let me know before going any further, and I will send laptop back.

UPDATE: trackpad is working now, not sure why it didn't at first.
 

Attachments

  • IMG_2190.JPG
    IMG_2190.JPG
    360 KB · Views: 4
Last edited:
Darren

Darren

Moderator
Staff member
You need to install Windows 10 Pro and it should activate on its own. Trackpad not working in BIOS is a little weird but you might just have it disabled. If it doesn't work in Windows that's a different story. There's usually a trackpad toggle key somewhere too.
 
johnb35

johnb35

Administrator
Staff member
Attach a usb mouse and reboot and see if it works. If it does then either trackpad is disabled or its broke.
 
U

ugabulldog

Member
Darren said:
You need to install Windows 10 Pro and it should activate on its own. Trackpad not working in BIOS is a little weird but you might just have it disabled. If it doesn't work in Windows that's a different story. There's usually a trackpad toggle key somewhere too.
Click to expand...

Ok, update: trackpad is working now, not sure why it wasn't before.... In order to install windows 10 from flash drive, I assume I need to change boot order in bios? I have the following questions, assuming screen in picture is where I make changes to boot sequence?

- the first pic shows Boot Sequence, I have USB first, should I uncheck all other options? And once 10 is installed I need to go back in a select internal HDD as first?
- Underneath is Boot list option: Legacy or UEFI, which should I select? (first pic also)
-second pic, Advanced Boot Options: should "Enable Legacy Option ROM's be checked or unchecked?
- anything else?

Lastly: Do I need a product key when downloading windows 10 to flash drive, or will I not need one until I install on laptop? if it is former, is there a way to get it off laptop (if not I will have to buy one), if it is the latter, will I not need one at all as it is embedded in laptop?

I may be getting ahead of myself with this question, but if and when I get 10 set up, do I need to go back into bios and change any of the settings back?

Thanks
IMG_2191.JPG IMG_2192.JPG
 
Last edited:
U

ugabulldog

Member
IMG_2197.JPG IMG_2196.JPG IMG_2198.JPG I finally got flash drive and am trying to install windows 10. I have gotten as far as selecting US keyboard screen, and licensing terms. Then the first picture screen comes up, when I select "upgrade install" the second picture comes up, when I hit close, it starts back over setting up windows. When I select "custom install" the third screen comes up, is the correct way to proceed and I should click next? Thanks
 
You must log in or register to reply here.
Top