HP G62 Thermal shutdown...

hi there.

i Have here one such piece.

Have removed well the old paste put on the processor MX2 and on the other 2 Chips Cheap Blue pads then have removed the paste from the metal sink and in theory everything should be perfect. If i remember right have put out the cooler and clean inside and between cooler and metal sink too. The cooler seems to work normal.

When i power the notebook it goes auto off after seconds. I have even unmount the HDD.

Thanks in advance

Does the fan work? Ideally you want to replace thermal pads with thermal pads, not thermal paste.

You didn't apply something correctly, its still overheating. Did you tighten the heatsink down good?

Darren said:

Does the fan work? Ideally you want to replace thermal pads with thermal pads, not thermal paste.

Click to expand...

this^
Sounds like heatsink/cpu clearance is not being met by the thermal paste. Clean and replace with the old thermal pads or buy new.