SpeedFan

M

m0nk3ys1ms

Active Member
Arti_2005 said:
No both fans blow air in, no fans blowing out. What do u mean does it stand straight up? This is a back view of the computer standin up.

100_4869.jpg


Edit: Should i install a fan blowing air out?
Click to expand...

Yes. And Temp 1 in Speedfan is the motherboard for me. Temp 2 is the CPU for me.
 
Last edited:
Arti_2005

Arti_2005

New Member
On speed fan it shows only temp1 and HD0 but in everest it shows spu, motherboard and HD.

Speedfan
HD0: 90F
Temp1: 104F << it always stays 104F

Everest
Motherboard: 91F
CPU: 88F
HD: 91F

Edit: I just turned on my pc so the temps are pretty low.
 
Arti_2005

Arti_2005

New Member
Why would the mobo be hotter then the cpu :confused: And thats not just when i turn it on but all the time like right now mobo is 93F and CPU is 90F. Sorry for all the questions but im still learning :p
 
dragon2309

dragon2309

P.I Dragon
monkeysims said:
Yes. And Temp 1 in Speedfan is the motherboard. Temp 2 is the CPU.
Click to expand...
thats not true, it depends on your mobo as to what the sensors are labelled to, my temp1 is CPU temp2 is mobo
 
Arti_2005

Arti_2005

New Member
dragon2309 said:
thats not true, it depends on your mobo as to what the sensors are labelled to, my temp1 is CPU temp2 is mobo
Click to expand...

Yea i was thinking the same thing. Thanx for all the info guys, this is a great site :D
 
jp198780

jp198780

New Member
i hvae 3 wires on my fans, why cant i change the speeds?

i can change the fan things, Fan 1, 2, 3, i have em on 100%, dont know what it's 4, it dont do anything though.

also, i tryed OCing my Dell's, my 240 was running at 1794, now it's at 1799, cant g over 1799.84. and on my GX110, it says unable to read clock, on both Dell's now.
 
jp198780

jp198780

New Member
forget about the other question, i have another 1. in this E-Machines, i have Fan 1, Fan 2, and Fan 3, just 1 and 2 have the RPM's, 1 is running at 110RPM, and 2 is at 24107RPM. i do have 3 fans, 1 on the heatsink, which is tiny, 1 in the back about a 60MM-80MM, and 1 in the the PSU, thats made 2 blow air into the case, anybody know which is which?

i have both 1 and 2 set at 100%, is this ok?
 
Arti_2005

Arti_2005

New Member
Well u can unplug them one by one and see which is which. They have to be pluged on the motherboard to get a reading so the one thats not connected to the motherboard is fan 3.
 
Last edited:
Arti_2005

Arti_2005

New Member
How fast u want the fan to spin is the percentage. I cant control none of my fans from SpeedFan on my Compaq, but on my sony i could.
 
jp198780

jp198780

New Member
i want them as fast i can make them lol, i guess SpeedFan requires 3-pin fans, and not 4-pin, becuase i got 4-pin in my Dells, that connect 2 the mobo, and 3-pin, that connect 2 the mobo in this E-Machines.
 
Edgesilhouette

Edgesilhouette

Member
Arti_2005 said:
Ok u got a good point about putting a fan under the HD since it gets really hot and makes the whole computer hot. I installed the fans from the cables that u connect ur HDs and Cdroms with. I connected the small one to 12 volt and the big one to 5 volt cuz its a very big fan and it makes a lot of noise. Heres a pic:
100_4868.jpg
Click to expand...

Did you use a punch??? Just wondering :D You have the same case as me. You should see all the fans i have in my case lol
 
Arti_2005

Arti_2005

New Member
What do u mean a punch ? Show me some pics of ur pc i wanna see where u put the fans so i can get an idea. I wanna put like 2 more on mine.
 
You must log in or register to reply here.
Top