Search results

Problem solved, had the cpu fan on the aux plug. CPU fan is 3 pin and mobo connector is 4 pin, oops. Thanks all.

This is a completly new build with no old parts. Nothing on hdd, have tried single stick of ram using both sticks seperatly.

I have just installed a AW9D max mobo and am getting so many post errors that I can't keep up with the numbers on the post errors panel. It finally stops at no. 75 and beeps high low constantly, Ive reset cmos and double checked all wires but no sucess. Would appreciate some help in step by step...

Make sure you match any GPU with your PSU. Most prebuilt computers have only enough power to run them at stock configurations and a new GPU will probably take at least 350 Watts.

I am going to rebuild my system about July and am now trying to choose the right CPU. I have been leaning toward the Opteron 165 because I like overclocking, but have recently been told that the NEW 165's are now locked to prevent O/C, any truth to that? I plan on using either a DFI or MSI mobo...

Well it's time to build a new rig. CPU; opteron 165 will be oc'd Mobo: MSI Neo4 platinum or ? GPU: 7900gt, 7900gtx, X1800xt, X1900xt or xtx. I don't think I will ever use an SLI or Crossfire configuration. I don't like Asus, I do like Abit, MSI and DFI Will be running OCZ Gold 2 x 512 for now...

I need to upgrade a Sony that has 305 watts and would like advice on which ones will work at 305. I've been doing a lot of googling about this but minimum wattage requirments are very sparse even at the mfg sites.

I need to install a larger PSU in a Sony VGCRB-43 in order to run a good graphics card. Does antone know if the Sony has a proprietary PSU or will a srandard ATX PSU fit and work ok?

The 250 is correct but I think the same price for a 165 is much better. I have found out that the 165 will o/c to fx57 specs for a lot less.

I am going to build another computer for gaming and have a question or two about processors. I am thinking about using the Opteron 250 or the Athlon 64 4000 single core. Is there any benefit in gaming applications of one cpu over the other? I will probably o/c. I will be using OCZ Gold 2x512...

I guess I have to bone up on RAM settings and adjust, I have it set to spd for now. The old RAM was 3500 and the new is 3200 so suppose there's a difference there but I was hoping that going from 512 to 1 gig would make up the difference. Any recommendations on ram settings to try?? The only...

I had to replace my Abit IC7G with a new one (same) and now I cannot overclock the way I used to. I was able to run my 2.4 at 3.0 or more and now cannot o/c at all without black screen. I ahve also replaced my old Geil 512 with new OCZ Gold 2x512 and my 3dmark scores have fallen by about 30%...

Well, RMAing the mobo, second cpu has same results and bios set and reset to default settings, same thing.

Hello all. I'm back again with a new problem. I installed new OCZ ram and computer would not boot. Changed back to old ram, same problem. Changed PSU, same problem.reseated all cables, same. Changed vid crd, same. Changed CPU for known good, same. cleared cmos, same. Changed HDD, same. The only...

OS was installed a year ago, XP home. I checked all connections and reseated them all. I have no raid, 1hdd. I got the machine to boot the first time after switching back to the Geil but froze after a minute or two. now thinking of this...

Not able to run memtest, only able to access bios and no other. I did try to set start from floppy but no go. Also set to start from CD and also no go. Thinking of ordering this psu would appreciate any comments.http://www.newegg.com/Product/Product.asp?Item=N82E16817167012

I'm only using 2 sticks. Same problem using only 1 stick of either ram.

Thanks all for the comments. I have reset Bios to all stock config and still nothing. I have reset all cables, reset cmos, removed and reinstalled vid crd. Anyone think the Ram may be fried? Does the OCZ really take that much more power? Looks like a new psu is first change?

I also posted this question on another forum and the replies all thought the psu went south. Any comments?

I have been using Geil Ram with no problems at all. I only had 512 so decided to upgradeto 1 gig. I got some new OCZ Gold 2x512 and installed. Nothing happened at all, no boot, no post, nothing. I reinstalled my Geil and it booted right up. After about a minute the screen froze and reboot would...