I had recently bought a new power supply because my old PSU (antec 650 watts)went up in smokes like there was a fire about to start (the rest of the hardware components were not effected). Once I installed the new PSU(antec 550 watts), the cpu was overclocked, not by much like 10% (from 4.0ghz factory clock to 4.1ghz). Memory is set to 100mhz to obtain the 1600mhz 8gigs. Cpu is an Intel i7 4790k. It booted up fine after intial login of Linux and then all of a sudden it shutdown. It will only boot up without the 8 pin connector for the cpu with no video (integrated video from the motherboard).
Once I connect the 8 pin connector for the cpu, it doesn't boot up. What do you think is the problem? Cpu or Motherboard. I already tried use one ram of stick and reset the bios through the jumper connector on the motherboard.
Once I connect the 8 pin connector for the cpu, it doesn't boot up. What do you think is the problem? Cpu or Motherboard. I already tried use one ram of stick and reset the bios through the jumper connector on the motherboard.