Memory Problem a.k.a Beep #_#

[MasterMind]

ok now.

i bought these:
Kingston HyperX PC2-6400 2GB 2X1GB DDR2 800MHZ CL4-4-4-12 240PIN Dual Channel Memory Kit
NCIX.com - Buy Kingston HyperX PC2-6400 2GB 2X1GB DDR2 800MHZ CL4-4-4-12 240PIN Dual Channel Memory Kit - KHX6400D2LLK2/2G In Canada.

recommanded in my motherboard manual.

So i take off the one i had ..and install both:

Legend:
| <- Memory Stick.
[ ] <- Memory Slot.

slot1[|]-[|]slot2 ...BEEP...ok lets take one off.
slot1[|]-[ ]slot2 ...BEEP...ok lets put it in the other one.
slot1[ ]-[|]slot2 ...WORKS.. ok what now

what's the problem? both can work on the second slot but
i'll get a beep whenever i put it in the first memory slot.

[i've checked with cpu-z to make sure i was talking about the correct memory slot.]

i've also look at several website talking about "Memory Timing"
but those sites shows alot of options in the bios....hmm my bios
only has 3 options for that specific thing.

any help???

p.s. : just got those today

 

[cRABu]

hmm... never heard of such a problem. make sure that there are no obstructions stuck in the first slot. Make sure it's clean, and the memory stick is properly in place. If you don't sole the problem...i think that your motherboard is faulty, my ideea is to take it back for waranty.

 

[MasterMind]

well well well

seems like i didnt put enough "strenght" on those babies ^___^'

both work now, no beeps ..thanks woot