Intel_man VIP Member May 30, 2008 #1 As some of you may know, I have an eVGA 9600 GT and I need some advice on how high should I overclock it to? It has a stock fan. Stock speed is 650 MHz -GPU 900 MHz -Memory
As some of you may know, I have an eVGA 9600 GT and I need some advice on how high should I overclock it to? It has a stock fan. Stock speed is 650 MHz -GPU 900 MHz -Memory
Kornowski VIP Member May 30, 2008 #2 Use Rivatuner, Put the fan up to about 60% or something, Try and keep your Core Temp below 65c. I'm not sure how well the 9600 will OC, but un-link the Core and Shader... Use ATI Tool to scan for artifacts too.
Use Rivatuner, Put the fan up to about 60% or something, Try and keep your Core Temp below 65c. I'm not sure how well the 9600 will OC, but un-link the Core and Shader... Use ATI Tool to scan for artifacts too.
lovely? Active Member May 30, 2008 #7 it will do 700 core clock easily, ill check other websites to see what the max usually is. EDIT: the highest i have read that is stable is 765/2050/2300 those are very very fast clocks, so i would set yours a bit lower and see what happens. good luck! Last edited: May 30, 2008
it will do 700 core clock easily, ill check other websites to see what the max usually is. EDIT: the highest i have read that is stable is 765/2050/2300 those are very very fast clocks, so i would set yours a bit lower and see what happens. good luck!
Kornowski VIP Member May 30, 2008 #8 The Core and Shader will give you the most performance increase... I wish my Memory would go higher than 1,000 though
The Core and Shader will give you the most performance increase... I wish my Memory would go higher than 1,000 though
