A CPU heat Monitoring program

my processor fan is going a 661 rpm is this to slow?

mainboard = 36C
Power/Aux = 38.5C
Hard Disk = 40C
Chassis Fan = 3183 RPM

why is my CPU fan going so slow compare to that!? i got 2 chassis fans
 
Addition/Multiplication (SSE) : 2844.78 MFlops
Division (SSE) : 944.84 MFlops
Square Root (SSE) : 827.32 MFlops
Addition/Multiplication (3DNow!) : 2225.21 MFlops
Division (3DNow!) : 438.07 MFlops
Square Root (3DNow!) : 293.18 MFlops
Addition/Multiplication (FPU) : 2717.36 MFlops
Division (FPU) : 138.16 MFlops
Square Root (FPU) : 63.15 MFlops
Whetstone : 807 KWPS
 
this is for my Ram

Bandwidth (Read Int. - Prefetch) : 0 MB/s
Bandwidth (Write Int.) - Prefetch) : 0 MB/s
Latency : 53 ns (118 cycles)
Memory Bandwidth (max. estimated) : 0 MB/s
 
Memory Global

Bandwidth 1 KB : 14244.69 MB/s
Bandwidth 2 KB : 15501.69 MB/s
Bandwidth 4 KB : 16109.9 MB/s
Bandwidth 8 KB : 16411.77 MB/s
Bandwidth 16 KB : 16560.6 MB/s
Bandwidth 32 KB : 16670.14 MB/s
Bandwidth 64 KB : 16634.99 MB/s
Bandwidth 128 KB : 9869.94 MB/s
Bandwidth 256 KB : 10046.96 MB/s
Bandwidth 512 KB : 9993.61 MB/s
Bandwidth 1 MB : 2940.5 MB/s
Bandwidth 2 MB : 2944.61 MB/s
Bandwidth 4 MB : 2923.86 MB/s
Bandwidth 8 MB : 2888.96 MB/s
Bandwidth 16 MB : 2887.8 MB/s
Bandwidth 32 MB : 2896.09 MB/s
Bandwidth 64 MB : 2896.32 MB/s
Bandwidth 128 MB : 2895.26 MB/s
Bandwidth 256 MB : 2896.25 MB/s
Bandwidth 512 MB : 2894.39 MB/s
Bandwidth 1024 MB : 2895.86 MB/s
Latency : 53.39 ns (118 cycles)
 
My VideoCard/Direct X 3D


Mode D3DX_DEFAULT : 604 FPS
Mode D3DX_RASTER : 205 FPS
Mode D3DX_REFERENCE : 0 FPS
Mode D3DX_TL : 602 FPS
Mode D3DX_2D : 16 FPS
 
Hard Drive


Sequential Write : 38.86 MB/s
Sequential Read : 43.41 MB/s
Buffered Write : 65.96 MB/s
Buffered Read : 67.82 MB/s
 
Is all this good or bad? i never done this before so i would like so expert opions wether this is good scores or bad or if there is something wrong ect.


Thanks Alot,
Fire
 
Back
Top