Alphatronix=OC Noob

Alphatronix

Alphatronix

New Member
As you can see by alot of my threads, im having difficulties OCing my comp. It works but it isnt stable at all. I cant run Orthos for more then 3 seconds without a problem. .. I dnt know much about the voltage so here's a my BIOS pics.. Maybe you see somthing I dont..

PLEAZ HELP ME!!


IMG00064.JPG

IMG00065.JPG

IMG00066.JPG

IMG00067.JPG

cpu1.JPG

temp.JPG
 
UPDATE:::


Ok, after reading a few OC manuals out there, I restarted the whole process.. I had no idea that the fsb has to be no more then half of the ddr. so if i have ddr800, my fsb shouldnt be above 400x9.5......

So now, I have
Vcore:1.28
3.8 ghz
1600 fsb @ 400x9.5
Everything is very stable now. I run prime95 without an error....


So this is where Im at right now/. Kinda pissed that its 3.8.... I really wana get to 4ghz and leave it at that until I can sell my ram and get some 1000+. This way I can make my fsb 500+ and really OC my baby...

I only worry that If I take my fsb above 400, Ill run into problems. Im running my RAM timing syncronized...

Should I bring it up to 425x9.5? raise the Vcore a bit and have it at 4ghz?
 
UPDATE:::::

OK!! I think I got it nice..

After a few thousand tries, this is what I got...

stable.JPG



Im running P95 for an hour now with no errors... My cpu temp is 66c stable under full load.. mobo 30c untouched... I might b ring down the vcore just slightly if after 6 hours of p95 no errors...
Im very pleased with my results.

Once I buy some OCZ RAM, Ill be taking this puppy from 4.0 ghz to possible 4.8 ghz with my AC7 cooler...


Any thoughts, comments, advice?
 
Last edited:
I had an error in p95 an hour into it. I raised the volt for both nforce, and nf200 chips. just slightly.... no more error. I think right now this is as stable as I can get it..

A full G huh.. well IDK. Air cooled and 5 ghz dont belong in the same sentence.. Depends really on the temps. Once i get the ram, if 5 ghz keeps temp. 75c or under then ok, but if it goes above 80c full load, then 5 isnt for me. I actually have another spot in my tower for a fan. that would make 6 all together.. Maybe with the extra fan, it might let it go.. Ill know soon thoug. going to put up my ram on craigslist..
 
Alphatronix said:
I had an error in p95 an hour into it. I raised the volt for both nforce, and nf200 chips. just slightly.... no more error. I think right now this is as stable as I can get it..

A full G huh.. well IDK. Air cooled and 5 ghz dont belong in the same sentence.. Depends really on the temps. Once i get the ram, if 5 ghz keeps temp. 75c or under then ok, but if it goes above 80c full load, then 5 isnt for me. I actually have another spot in my tower for a fan. that would make 6 all together.. Maybe with the extra fan, it might let it go.. Ill know soon thoug. going to put up my ram on craigslist..
Click to expand...

No, no..''

I meant a full g from stock..

aim for like 4.2Ghz you can do it'


I am tryin to hit 5ghz today but i cant....4.92ghz at 1.689V

chip wont die, fry, or go high
 
You must log in or register to reply here.
Back
Top