Ata133

bavaria-n

New Member
Hallo, I am not computer expert but replaced motherboards before and worked grate…
The numbers on motherboard are:
ATA 133
15-k47-011000
DDR2667
I have a hard time with finding one, please help me, I need the Bios to.
Jerry
 
Need more info then that. ATA 133 is just a IDE port and DDR2 667 is a memory speed. Does it have a Make and Model number?
 
I am going banana with this motherboard ,checking it inch by inch ,there is no any more numbers on it ,what about the 15-k47-011000 ?
 
Is it a dell, hp, compaq, gateway computer? We need the manufacturer and model number of computer you have.
 
So your saying that you need a new motherboard to replace that one or one just like it? Is this board bad? We need to know exactly what you want.
 
I connected good power box, it did not help. Now I ordered new Bios, is only $10, if that don’t help I will buy new motherboard
 
A good motherboard with those features you want would be a Foxconn 671M.
It's got DDR2-667 support, ATA133 port, 2 sata, PCI-E, socket 775

They are nice and cheap too. I'm using one (an OEM one though, from Acer) and it is great.
 
A good motherboard with those features you want would be a Foxconn 671M.
It's got DDR2-667 support, ATA133 port, 2 sata, PCI-E, socket 775

They are nice and cheap too. I'm using one (an OEM one though, from Acer) and it is great.

What else can be used to replace this motherboard? I wan the system to be reliable.
 
Last edited:
:( I had got the same problem last weekends. And my nerves didnt cathced all this movement from one place to another. I didnt find a right answer and hummer maked this for me :)
 
A good motherboard with those features you want would be a Foxconn 671M.
It's got DDR2-667 support, ATA133 port, 2 sata, PCI-E, socket 775

They are nice and cheap too. I'm using one (an OEM one though, from Acer) and it is great.

Where I can get it?
 
It will still work just a little slower speed is all. You won't hardly see the difference.
 

That A-Bit Brand motherboard on E-Bay is overpriced. I think you are straining to much at the ATA port speed. If you are really concerned with hard drive speed I would buy a new Serial ATA hard drive since they have faster transfer rates. Use the Serial ATA drive as your master and use your old ATA hard drive as a backup hard drive in your system.

Take a look at the GIGABYTE GA-G41M-ES2L motherboard. Later if you wanted to upgrade the processor on this motherboard to a Core 2 Quad Q9400 processor. The motherboard is only $65:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128388

Here is a decent hard drive:
Western Digital Caviar Blue WD3200AAKS 320 gigabyte Hard Drive - $50
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136074

Also, I think you are already aware of this, changing a motherboard means you will also have to reinstall your operating system.
 
That A-Bit Brand motherboard on E-Bay is overpriced. I think you are straining to much at the ATA port speed. If you are really concerned with hard drive speed I would buy a new Serial ATA hard drive since they have faster transfer rates. Use the Serial ATA drive as your master and use your old ATA hard drive as a backup hard drive in your system.

Take a look at the GIGABYTE GA-G41M-ES2L motherboard. Later if you wanted to upgrade the processor on this motherboard to a Core 2 Quad Q9400 processor. The motherboard is only $65:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813128388

Here is a decent hard drive:
Western Digital Caviar Blue WD3200AAKS 320 gigabyte Hard Drive - $50
http://www.newegg.com/Product/Product.aspx?Item=N82E16822136074

Also, I think you are already aware of this, changing a motherboard means you will also have to reinstall your operating system.

I just purchased this one -thanks
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150333772915&ssPageName=STRK:MEWNX:IT
 
Back
Top