BIOS Help

[512mb]

Hey guys I was just wondering, I recieved a new mobo and it comes with the required setup disk's, ect. But I was wondering do I need to manually make any changes in the BIOS to get the full power out of my MOBO? If so what settings? Here are the spec's of my mobo :

Model
Brand GIGABYTE
Model GA-965P-DS3
Supported CPU
CPU Socket Type LGA 775
CPU Type Quad-core / Core 2 Extreme / Core 2 Duo / Pentium
FSB 1066/800/533MHz
Supported CPU Technologies Hyper-Threading Technology
Chipsets
North Bridge Intel P965 Express
South Bridge Intel ICH8
Memory
Number of Memory Slots 4×240pin
Memory Standard DDR2 800
Maximum Memory Supported 8GB
Dual Channel Supported Yes
Expansion Slots
AGP Slots None
PCI Express x16 1
PCI Express x1 3
PCI Slots 3
Storage Devices
PATA 1 x ATA100 up to 2 Devices
SATA 3Gb/s 6
SATA RAID 0/1
Additional RAID Controller GIGABYTE SATAII controller
Onboard Video
Onboard Video Chipset None
Onboard Audio
Audio Chipset Realtek ALC883
Audio Channels 8 Channels
Onboard LAN
LAN Chipset Marvell 88E8053
Max LAN Speed 10/100/1000Mbps
Rear Panel Ports
PS/2 2
COM 1
LPT 1
USB 4 x USB 2.0
S/PDIF Out 1x Optical and 1x Coaxial
Audio Ports 6 Ports
Onboard USB
Onboard USB 3 x USB 2.0 connectors support 6 ports
Physical Spec
Form Factor ATX
Dimensions 12.0" x 8.3"
Features
Power Pin 24 Pin

 

[bumblebee_tuna]

Well, of the top of my head, I know that gigabyte has 'Optimized Settings' or of the equivalent that usually sets things to typical settings. If you are big on graphics and games, you can set the AGP Aperture to 256 MB if you have an AGP board. You can choose to disable some useless ports, such as the Serial and Parallel ports. You can set the optical and floppy drives to boot up first for future tasks..........