Hello again all!
As some of you know, I recently built a new pc and have been ironing the bugs out over the past week. The thing that is currently giving me problems is the onboard audio. I have a case with a front audio/mic plugs and wires. I tried attaching these wires to the JFAUDIO1 front panel audio header on the motherboard. Well, I probably shouldnt have messed with it. I removed jumpers to plug in the wires from the front panel on the case (bangs head on wall). The problem now is I dont have any audio to the speakers. In looking at the manual it says that plugging in to the audio header will disable rear plugs!? Well I am in over my head. All I really want is sound to my speakers, I dont care about the front plugs on the case. Do I need to plug in the jumpers again? There were 3 jumpers on the header as i remember...
Here is the info from the manual:
Pin 1: Min in/center
Pin 2: Ground
Pin 3: Mic power/Bass
Pin 4: Audio Power
Pin 5: Right line out/Speaker Out Right
Pin 6: Right line out/Speaker out RIght
Pin 7: Reserved
Pin 8: Key
Pin 9: Left Line out/Speaker out left
Pin 10: Left line out/Speaker out left
Pin 11: Right line in/rear speaker right
pin 12: right line in/rear speaker right
pin 13: left line in/rear speaker left
pin 14: left line in/rear speaker left
any help appreciated as usual! Thanks guys!
As some of you know, I recently built a new pc and have been ironing the bugs out over the past week. The thing that is currently giving me problems is the onboard audio. I have a case with a front audio/mic plugs and wires. I tried attaching these wires to the JFAUDIO1 front panel audio header on the motherboard. Well, I probably shouldnt have messed with it. I removed jumpers to plug in the wires from the front panel on the case (bangs head on wall). The problem now is I dont have any audio to the speakers. In looking at the manual it says that plugging in to the audio header will disable rear plugs!? Well I am in over my head. All I really want is sound to my speakers, I dont care about the front plugs on the case. Do I need to plug in the jumpers again? There were 3 jumpers on the header as i remember...
Here is the info from the manual:
Pin 1: Min in/center
Pin 2: Ground
Pin 3: Mic power/Bass
Pin 4: Audio Power
Pin 5: Right line out/Speaker Out Right
Pin 6: Right line out/Speaker out RIght
Pin 7: Reserved
Pin 8: Key
Pin 9: Left Line out/Speaker out left
Pin 10: Left line out/Speaker out left
Pin 11: Right line in/rear speaker right
pin 12: right line in/rear speaker right
pin 13: left line in/rear speaker left
pin 14: left line in/rear speaker left
any help appreciated as usual! Thanks guys!