ScottALot
Active Member
Hey Guys,
I've got this build
Gigabyte M5 Sniper Z87 board
Intel i5-4670K @ Stock w/ Corsair AIO loop
EVGA GTX 760
XFX 750W Black Edition PSU
Corsair Platinum 8GB, I believe 1600MHz or 1866MHz
Was playing some Batman Arkham Origins, got a BSOD. It did its thing, backed up memory, and waited for me to shut down. I did so, tried to restart, and now it's doing boot cycles and getting stuck at post code "15" which is North Bridge startup. It hangs there for a while, I hear hard disks spinning up, before it finally boot cycles, so I'm unsure whether it's actually the North Bridge or the next item failing.
I looked in the case and found my front panel connector was unplugged. Upon closer inspection, I found that some of the connectors were bent. I used a pen and got them back in position, plugged the front panel back in, started it back up... still same post code.
I'm contacting support, but want to hear if ya'll have any suggestions.
I've got this build
Gigabyte M5 Sniper Z87 board
Intel i5-4670K @ Stock w/ Corsair AIO loop
EVGA GTX 760
XFX 750W Black Edition PSU
Corsair Platinum 8GB, I believe 1600MHz or 1866MHz
Was playing some Batman Arkham Origins, got a BSOD. It did its thing, backed up memory, and waited for me to shut down. I did so, tried to restart, and now it's doing boot cycles and getting stuck at post code "15" which is North Bridge startup. It hangs there for a while, I hear hard disks spinning up, before it finally boot cycles, so I'm unsure whether it's actually the North Bridge or the next item failing.
I looked in the case and found my front panel connector was unplugged. Upon closer inspection, I found that some of the connectors were bent. I used a pen and got them back in position, plugged the front panel back in, started it back up... still same post code.
I'm contacting support, but want to hear if ya'll have any suggestions.
