Computer startup, No display

L

Lolman

Member
Hey guys.
A friend of mine turned on my computer but the power on button got jammed in the socket thing, so it turned off straight away as it started. He then moved some of my stuff around and the computer while it was OFF.
Unfortunately I was in the shower as this was happening so I don't know if anything else happened:L

Now when I go to turn my computer on it starts up but there is no display on the monitor/screen. It says "power saving mode" when I press source back to HDMI.
I use an HDMI cable.

What I have tried so far:
Restarting computer
Pulling HDMI cable in and out
VGA and DVI cables
Tried another monitor, did not work
Tried an XBox with the monitor, worked (therefore it is a comouter problem)
Tried removing RAM and putting back in
Tried holding down power button as the power plus was out (to take all remaining power out), then plugging it back in


Please help me ; ( !!
 
Try resetting the bios using either the jumper pins or just pull the battery out for a few minutes.

Do you have a graphics card or onboard ?
 
My BIOS battery is located under my graphics card. I decided to attempt to take the card out but realised it was too hard, I unplugged two of the screws and decided to leave it at that.

Now when I go to turn my computer on it makes these loud noises like the fan is speeding up then slowing down, it does it in identical sequences almost.

This really sucks, please someone help :L
 
Okay the loud noises are coming from the graphics card, I think I may need to put the screws back into it :L
 
You must log in or register to reply here.
Back
Top