Connecting Case Speaker to Intel D925XECV2

P

powk

New Member
I'm in the process of building a new comp and I have the Intel D925XECV2 inside of a Lian Li PC-6077B case. The case came with a speaker pointing down towards the front of the case (under the HD), which has a 3 pin (black and red on outside, vacant middle) speaker connector. My motherboard has a front panel audio connector spot (which is being used) and a connector for CD-ROM audio. Where does the speaker connector go on the motherboard? Aux power? This is the first pc I'm building and I'm totally clueless on this. Thanks for any help.
 
D925XECV2.jpg

- Well your ATX24 cable goes to the power connector on the left by the DIMM slots
- The ATX12 goes into the 2x2 connector but the CPU
- A 4 pin molex connector goes into the connector by the CPU
- If i can see it properly your speaker connector goes into the top left section of the board

If you need to see what the various connections and stuff look like, see PSU 101.
 
I'm not having any trouble with any of the other connections (power), the computer was up and running and everything, I just can't figure out where to plug in the speaker connector. Thanks again for any help.
 
I can't find any reference to the location of the PC speaker connector, if there is no spot labeled spkr (or something similar) and no mention of it in the manual it probably doesn't have one.
 
You must log in or register to reply here.
Back
Top