CPU 64 bit?

P

playerincarbon

New Member
Hey folks...

Can anyone tell me if my CPU can support a 64 bit OS please?

<<< System Summary >>>
> Manufacturer : Fujitsu Siemens Computers
> Mainboard : FUJITSU SIEMENS D2740-A1
> Chipset : nVidia GeForce 7050
> Processor : Intel Pentium E2140 @ 1600MHz
> Physical Memory : 4096MB (2 x 2048 DDR2-SDRAM )
> Video Card : NVIDIA GeForce 7050 / NVIDIA nForce 630i
> Hard Disk : Western Digital WD1600AAJS-07PSA0 (160GB)
> DVD-Rom Drive : HL-DT-ST DVDRAM GSA-H60N
> Monitor Type : Maxdata Computer B101915 - 19 inches
> Network Card : Nvidia MCP73 Ethernet
> Operating System : Microsoft Windows XP Professional 5.01.2600 Service Pack 3 (32-bit)
> DirectX : Version 9.0c (March 2008)

<<< Processor >>>

> Processor : Intel Pentium E2140

>> General Information
Type : Intel Pentium
Internal Specification : Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz
Model Number : E2140
Codename : Conroe-L
Revision : M0
Technology : 0.065µ
CPU ID : 6.F.D
CPU IDEx : 6.F.D
Microcode : MU06FDA3
Number of Physical Processors : 1

>> Instructions
IA-64 Technology : No
Intel64 (EM64T) : Yes
AVX : No
FPU128 : No
SSE5 : No
SSE4a : No
SSE4.2 : No
SSE4.1 : No
S-SSE3 : Yes
SSE3 : Yes
SSE2 : Yes
SSE : Yes
AES : No
Extended 3DNow! Technology : No
3DNow! Technology : No
3DNOW Prefetch : No
3DNow! Pro Technology : Yes
AMD MMX Technology : No
MMX Technology : Yes
Cyrix MMX Technology : No
FMA : No
FMA4 : No
OSXSAVE : No
XSAVE : No
XOP : No
F16C : No
MOVBE : No
PCLMULQDQ : No
CLF - Cache Line Flush : Yes
CX8 - CMPXCHG8B : Yes
CX16 - CMPXCHG16B : Yes
CMOV - Conditionnal Move Inst. : Yes
MON - Monitor/Mwait : Yes
POPCNT : No
RDTSCP : No
SEP - Fast System Call : Yes
TBM : No
BMI : No

>> Miscellaneous
XD - No-execute Page : Yes
VT-x - Virtualization : No
TXT - Trusted Execution Technology : No
SVM - Secure Virtual Machine : No
FPU - Co-processor Built-in : Yes
FXSR - Fast Float Save & Restore : Yes
xTPR - Send Task Priority : Yes
DAZ - Denormals Are Zero : Yes
FFXSR : No
LAHFSAHF : Yes
CMPLEGACY : No
ALTMOVCR8 : No
ExtApicSpace : No
3DNow! Technology : No
PBE - Pend. Brk. EN. : No
LAHF - LAHF/SAHF Inst. : No
ABM : No
MASSE - Misaligned SSE : No
OSVW - OS Visible Workaround : No
IBS : No
P1GB - 1GB Page Size : No
SKINIT, STGI, DEV : No
WDT - Watchdog Timer : No

>> Features
DTES64 : Yes
x2APIC : No
APIC - Local APIC Built-in : Yes
VME - Virtual Mode Ext. : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
MTRR - Memory Type Range Reg. : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
DS - Debug Trace & EMON Store : Yes
SS - Self Snoop : Yes
ACPI - Software Clock Control : Yes
TM - Thermal Monitor : Yes
TM2 - Thermal Monitor 2 : Yes
EST - Enhanced SpeedStep Technology : Yes
HTT - Hyper-Threading : Yes
SBF - Signal Break on FERR : Yes
DSCPL - CPL qualified Debug Store : Yes
CID - Context ID : No
LT - LaGrande Technology : No
PDCM : Yes
DCA - Direct Cache Access : No
EPS - Enhanced PowerSaver : No

>> Features Hyper-Threading
Technology : Yes - Disabled

>> Virtualization
VT-x : No

>> Power Status
Turbo Boost : No
Digital Thermometer : Yes
Operating Point Protection : No
Dynamic FSB : Yes
Dynamic Acceleration : No
Performance Energy Bias : No
APERF_MERF : Yes

>> Addressing Information
Physical Addressing max. : 36-bit
Linear Addressing max. : 48-bit

>> Advanced Settings
In Order Queue Depth : 8
Low Power Mode : No

>> Mainboard Upgradeability
Socket/Slot : CPU
Upgrade interface : ZIF Socket
Supported Speed : 1600MHz(or more)
Supported Voltage : 3.3V

> Frequency : 1600MHz

>> General Information
Real Frequency : 1200.2MHz
Multiplier : 6x
Low/High Multiplier : 6x / 8x
Multiplier Locked : Yes
Marketing Frequency : 1600MHz

>> Front Side Bus Information
Bus Speed : 200MHz
FSB Frequency : 800.1MHz (QDR)
Turbo Mode : No

>> Initial Frequencies
Frequency : 1600MHz
Bus Speed : 200.00MHz (QDR)
Multiplier : 8x

>> Frequency Control
Core #1 : 1200.21MHz
Core #2 : 1200.08MHz

>> Control Clock Frequency
Enhanced SpeedStep (EIST) : Yes - Enabled
C1E - Enhanced Halt Mode : No
Dynamic FSB : Yes - Disabled
Dynamic Acceleration (IDA) : No
Turbo Mode : No

>> Thermal Information
Thermal Design Power : 65 W
Core Power : 48.75 W (estimated)
Thermal control TM1 : Yes - Enabled
Thermal control TM2 : Yes - Enabled
Thermal Control Circuit : Yes
Digital Thermal Sensor : Yes
Clock Modulation (ODCM) Enabled : No

>> Processor Performance Information
Throttle Mode AC : None
Throttle Mode DC : None
Current Configuration : None
Throttle : 1599MHz

>> Processor Power Management Information
Processor Throttling : Yes
Throttle Range : 75% - 100%
Active Power Scheme : Gaming Mode Power Plan

> Number of Core : 2

>> General Information
Number of Threads : 2 (max.2)
Number of Core : 2 (max. 2)
Number of Thread per Core : 1 (max. 1)

>> Topology

> Support : Socket 775 LGA

> Cache L1 : 2 x 64KB

>> General Information
Type : Burst, Synchronous
Write Mode : Write-Through
Place : On Chip
Correct : Parity

>> Cache Information
Data Cache : 2 x 32KB (8-way, 64 bytes line size)
Code Cache : 2 x 32KB (8-way, 64 bytes line size)
Number of Threads : 1

>> Cache Parameters
Type : Data Cache
Ways of associativity : 8
Fully Associative : No
Self Intializing : Yes
System Coherency Line Size : 64
Physical Line partitions : 1
Number of threads sharing : 1
Number of processor cores : 2
Number of Sets : 64

>> Cache Prefetcher Optimization
Adjacent Cache Line : Yes (128-bit)
DPL L2 Cache : Yes
DCU L1 Cache : Yes
IP L1 Cache : Yes

> Cache L2 : 1024KB

>> General Information
Type : Burst
Write Mode : Write-Back
Place : On Chip
Multiplier : 1/1x (1200.1MHz)

>> Cache Information
Associativity : 4-way
Line Size : 64 bytes
Number of Threads : 1
Bus : 256-bit
Prefetch Logic : Yes

>> Cache Parameters
Type : Unified Cache
Ways of associativity : 4
Fully Associative : No
Self Intializing : Yes
System Coherency Line Size : 64
Physical Line partitions : 1
Number of threads sharing : 2
Number of processor cores : 2
Number of Sets : 4096

>> Cache Prefetcher Optimization
Adjacent Cache Line : Yes (128-bit)
DPL L2 Cache : Yes
DCU L1 Cache : Yes
IP L1 Cache : Yes

> Voltage VID : 3.300 V

>> General Information CPU
Voltage : 1.188 V
MaxVID : 1.325 V
MinVID : 1.325 V

> FPU Coprocessor : Present

>> General Information
Integrated : Yes
Model : Compatible Intel

> Core 1 Activity : 5%

> Core 2 Activity : 0%

------------------------------------------------------------------------------------------
***** End of report *****

If more info needed, please say.

Thanks.
 
Ok thanks.

I have only installed XP, and have no exp with Vista which i would like to install. Once i start the install will i see an option for 32-64 versions, or is that not with the disc?
 
the 32-64 bit Oss are on separate disk. And you will need to be sure that 1. your motherboard supports 64 bit, and that your manufacturer supplies 64 bit drivers (ran into a problem here with a Gateway, they only had a 32 bit webcam driver, and it never worked right).
 
what i meant there is be sure your northbridge and integrated video are available in 64 bit. if they are not, then most of the motherboards features will be useless.
 
playerincarbon said:
Ok thanks.

I have only installed XP, and have no exp with Vista which i would like to install. Once i start the install will i see an option for 32-64 versions, or is that not with the disc?
Click to expand...

Forget installing VIsta and go with windows 7, you'll be much happier.
 
Oh ok.

Can you help me with that?

At the mo im posting on a Laptop that i put Vista on, but its only a 32 bit system which i knew already. Its the desktop that id like to have Vista running. I just want to make sure i do things right.

If the northbridge and video are ok, is there a way to just install Vista over XP without wiping everything?

My Version of Vista is Business if thats any help.
 
You can't install the same copy of the OS on more than one machine. You would need a new copy with a different cd key.
 
Well when i had the desktop given to me i was also given lots of software, including the Vista already installed. I took that off because at the time i prefered XP Pro. My friend installed the Vista on to this Laptop and used the same key as the desktop ran. Ive never had any problems with the Laptop and it continues to update fine. So now that im a bit more familiar with Vista, i thought about putting it into the desktop. As im aware the desktop was part of a group in a small business and they all ran the same OS, could be wrong tho... but still, my Laptop is fine.
 
Maybe its a volume license which allows you to install on more than one pc. But technically Vista business is not for an end user, mainly for actual companies. So not sure if it would actually be legal to install that or not.
 
I wouldnt know which licence is being used. I wouldnt have thought i was doing anything illegal either because i run a business from home and i still draw for them from time to time.

Anyways, so now i know the cpu is 64 bit, is there any chance i can get some help with this northbridge and graphic stuff. If someone points me in the right direction ill try and find things myself. I understand and appreciate that my system isnt the nuts, but its all i have right now and just hope to get the best out of it without the expense if i can help it.
 
You must log in or register to reply here.
Back
Top