Do i need to change my ram timings ?

[hardcore_7]

Manufacturer: Apacer & A-DATA
Type: DDR3
Size: 4096 Mbytes
Channels: Dual
DC Mode: Symmetric
DRAM Frequency: 533MHz
FSB: DRAM: 1:2
Case# Latency: (CL): 7.0 clocks
Rase# Cas# Delay (tRCD): 8 clocks
Rase# Precharge (tRP): 8 clocks
Cycle Time (tRAS): 20 clocks
Row Refresh Cycle Time (tRFC): 78 clocks
Command Rate (CR) 2T.

NOTE: Motherboard is ASRock G41C-S.

Thanks in advance

 

[fastdude]

You do it in the BIOS, hit delete when your PC POSTs (startup)

 

[salvage-this]

I don't see any reason to change them. Are they not operating at the advertised specs?

 

[fastdude]

I don't see any reason to change them. Are they not operating at the advertised specs?

Whoops

I could have sworn the thread was called "how to change my ram timings"

As above.

 

[hardcore_7]

i think that my pc ran faster when i set dram frequency to 400_800mhz because dram timings are much lowers in "800mhz" !!!