Don't know what to do Help me please

C

CosmoRide

New Member
Hi,
My name is Sunny and I'm new to this forum. Ok here is what happend
My little brother got a Nvidia card to play games.Here is what he did :
before the install he went into the device manager and disabled the Intergrated Video card and installed the nvidia but the nvidia card was not working (he got it used from a friend) and now we can't get onto the comp because every time we start the comp the monitor gets turned off.
I tried getting into the Bios but it would go ....the monitor turns of every time the comp is powerd on.
Is there anyting I can do to fix this to enable the Intergrated Video card
Please help me ?

Thank you
Sunny B.
 
Trizoy said:
press f8 at startup, try safe mode.

Are you sure he did not go into the bios?
Click to expand...
Yes I tried it my self wont let you into the bios or F8 keeps on turning off even before you get to the part where you get into the bios or F8 :confused:
 
Trizoy said:
press f2 to get into bios... you will be able ton enable the video card when you enter bios...
Click to expand...

Can't get into the bios All I get is the Monitor msg : check signal cable !
which is fine I think it might be the motherboard that is gone:confused:
what do you guys think?
and what would be the easiest way to get the stuff of of the hard drive
is there an addapter that can be hooked up with the hard drive and then connect to a diferent comp (like one of those external hard drives?)
 
Well if you want to do it that way, just pull out the hd... Change the jumper seeting (little pin on front) to slave and plug into another computer as a slave drive.
 
You must log in or register to reply here.
Back
Top