DVD burner won't recognize blank cd-r

M

mindbender00

New Member
My dvd burner dosen't recognize blank cd-r, but it will recognize blank dvd+/r blanks, also I've tried difference brands of cd's
 
CPU(s)
Number of CPUs 2 (1 Physical)

CPU#1 APIC ID = 0
Name Intel Pentium 4 630
Code Name Prescott
Specification Intel(R) Pentium(R) 4 CPU 3.00GHz
Family / Model / Stepping F 4 3
Extended Family / Model 0 0
Package LGA 775
Core Stepping N0
Technology 90 nm
Supported Instructions Sets MMX, SSE, SSE2, SSE3, EM64T
CPU Clock Speed 2992.6 MHz
Clock multiplier x 15.0
Front Side Bus Frequency 199.5 MHz
Bus Speed 798.0 MHz
L1 Data Cache 16 KBytes, 8-way set associative, 64 Bytes line size
L1 Trace Cache 12 Kuops, 8-way set associative
L2 Cache 2048 KBytes, 8-way set associative, 64 Bytes line size
L2 Speed 2992.6 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits

CPU#2 APIC ID = 1
CPU Name Intel Pentium 4 630 (logical unit)


Mainboard and chipset
Motherboard manufacturer Dell Inc.
Motherboard model 0KF623,
BIOS vendor Dell Inc.
BIOS revision A02
BIOS release date 10/13/2005
Chipset Intel i945G/GZ rev. A2
Southbridge Intel 82801GB (ICH7) rev. 01
Sensor chip SMSC 7901

Memory
DRAM Type DDR2-SDRAM
DRAM Size 512 MBytes
DRAM Frequency 266.0 MHz
FSB:DRAM 3:4
CAS# Latency 4.0 clocks
RAS# to CAS# 4 clocks
RAS# Precharge 4 clocks
Cycle Time (TRAS) 11 clocks
# of memory modules 2
Module 0 Samsung DDR2 PC4300 - 256 MBytes
Module 1 Samsung DDR2 PC4300 - 256 MBytes

Software
Windows version Microsoft Windows XP Media Center Edition Professional Service Pack 2 (Build 2600)
DirectX version 9.0c
 
You must log in or register to reply here.
Back
Top