Extend partition

If you haven't filled up the second storage partition too much you can shrink that down in size and then move it to allow expansion space for the OS primary. Moving a partition will chew up time however.

Which drive in your sig is split the 80gb ide or 140gb sata drive? On the last build here an ide drive was the host until shuffling OSs around and one of the sata drives in was set up as a storage/backup drive by itself.
 
Partition Magic or gparted should work. Backup anything you need first because there's no gurantee it will work (it usually does though)
 
Partition Magic or gparted should work. Backup anything you need first because there's no gurantee it will work (it usually does though)

Wouldn't it be simpler to just go into Computer Management and go into the disk manager instead of downloading some 3rd party software?
 
You can't resize a partition without deleting it that way and that's guranteed data loss.

Actually, you can if you have a dynamic drive but most people use basic so I just assume 3rd party software is needed.
 
When first intending to see a drive split the best move is to allow extra space on the primary OS host partition in the event you later need more space for additional programs or simply seeing more files added there. GParted will easily shrink the storage partition and generally sees less problems over the typical softwares like PM since it is far less involved seeing a basic structure.

With only a small amount on the second partition and enough space remaining on the first for ease and generally a time saver over moving a shrunk down second partition I would simpl copy+paste everything over to a temp folder and delete the second, iincrease the primary where you want it, and then create a new storage partition. Moving partitions is like zero filling a drive with an old dos tool since you have to leave that going for hours as it creeps along!

In Vista the Disk Management tool allows you to shrink or expand any secondary partition but is not advised for expanding the primary. This is due to having the OS being loaded into memory from the same partition. For resizing the first system/boot primary you need a 3rd party tool there.

Cromewell is quite correct when referring to most using the basic disk since server editions are most likely to see dynamic volumes. There are a few methods however for coversion from one to the other. Some MS information regarding the Server 2003 edition goes as follows.

Boot and system partitions. You can convert a basic disk containing the system or boot partitions to a dynamic disk. After the disk is converted, these partitions become simple system or boot volumes (after restarting the computer). You cannot mark an existing dynamic volume as active. You can convert a basic disk containing the boot partition (which contains the operating system) to a dynamic disk. After the disk is converted, the boot partition becomes a simple boot volume (after restarting the computer).
Mirroring the boot and system volumes. If you convert the disk containing the boot and system partitions to a dynamic disk, you can mirror the boot and system volumes onto another dynamic disk. Then, if the disk containing the boot and system volumes fails, you can start the computer from the disk containing the mirrors of these volumes. For more information, see Create and test a mirrored system or boot volume. http://technet.microsoft.com/en-us/library/cc757696.aspx
 
Back
Top