gainward geforce 7800gtx U3500 pcx problems..

tenox

banned
Hi !

I newly bought a new pc and everything works out fine except from my graphic card. I have a gainward geforce 7800gtx U3500 pcx (http://www.komplett.no/k/ki.asp?sku=310687&cks=PRL)

I get this message that it dont get enough power. I have a 430 w pcu and in the catalogue it says that it needs 350w.

I do think I need an extra contact from the power supply to the graphic card??!!! I dont know what kind of contact this is, were should be plased on the graphic card, and how it looks like. Can anyone help me, cause i have invested a lot of money in this :o

Kindest Regards

Steffen
 
yah u should see something like this
power.jpg


and stick that into a socket on your card's far right side...
connector.jpg

should look something like that
 
only connected to...

Archangel said:
did you connect the power connector on the card itself?

I have only connected the card to the pci ex slot. Do i have to do anything else then?
 
imaznumkay said:
yah u should see something like this
power.jpg


and stick that into a socket on your card's far right side...
connector.jpg

should look something like that

hmm , det pictures doesnt show up :confused:
 
you should have such a cable
PCI1_400.jpg

that came with your card.
at the end of the card (not the metal plate, but the other side, should be a black 6 pin connector.
you have to put the cable on that connctor. and connect the other end of the cable to the cable of you power supply.
 
hmmm...

Archangel said:
you should have such a cable
PCI1_400.jpg

that came with your card.
at the end of the card (not the metal plate, but the other side, should be a black 6 pin connector.
you have to put the cable on that connctor. and connect the other end of the cable to the cable of you power supply.

Thats what i thought. I did found that 6 pin @ my card ,and they say the same in the catalogoue. but the cable thit not come whit my card :confused: I searched through all of my boxes, but its not there :eek:
 
i have found it but...

Archangel said:
go back to the shop, the power cable should be included.

I searched thtough my stuff one more time, and finally i found the cable.
I have now connected the cable from the graphic card to two cables from the power supply. I dont get the message about having too little power anymore, but when i run far cry everything is ****ed up.
the picture is sharp and light, and some things are dark as hell :o
What should I do to fix this?? whats the problem then??
Thanx alot for your help !!! :)
 
earlier...

alanuofm said:
try using an earlier driver. the newest ones had problems recently.

Have installed an earlier version before with the cd that was with my graphic card, and the same problem appears :o
 
Back
Top