I have problem with my motherboard and graphics card.
My PC specs:
Motherboard: Asus M4A785D-M PRO
CPU: AMD Athlon 64 X2 2.6GHz
Mem: Kingston DDR2 HyperX 2x2GB Dual-Chanel
GPU OLD: HIS X 1550 Hyper Memory 128MB 64-Bit DDR2
GPU NEW: Gainward GeForce GTX 460 GLH 1024MB 256-bit GDDR5
Sys disc: Western Digital 160 GB SATA
Power Supply (3 days old): Cooler Master RS-600-ACAB-L3 600Watts
PC run perfect with my old graphics card.
But when i change it to the new graphics -monitor will not start.
Monitor is still in stand-by mode (orange led)
I already tried :
1.I bought new power supply 600W (old was 460W).
2.Graphics is OK - tested in another PC (i dont know details about that pc).
3.CLRTC procedure to Clear the CMOS done
4.Bios i set to GFX0-GPP-IGFX-PCI :GFXO = Primary video controller on a PCI-e x16 slot
5.Yes i check all connectors.
6. Latest Bios used 1001.
I think the problem is in motherboard , BIOS ,PCIe compatibility.
Got any idea ?
Thank you.
Simon.
My PC specs:
Motherboard: Asus M4A785D-M PRO
CPU: AMD Athlon 64 X2 2.6GHz
Mem: Kingston DDR2 HyperX 2x2GB Dual-Chanel
GPU OLD: HIS X 1550 Hyper Memory 128MB 64-Bit DDR2
GPU NEW: Gainward GeForce GTX 460 GLH 1024MB 256-bit GDDR5
Sys disc: Western Digital 160 GB SATA
Power Supply (3 days old): Cooler Master RS-600-ACAB-L3 600Watts
PC run perfect with my old graphics card.
But when i change it to the new graphics -monitor will not start.
Monitor is still in stand-by mode (orange led)
I already tried :
1.I bought new power supply 600W (old was 460W).
2.Graphics is OK - tested in another PC (i dont know details about that pc).
3.CLRTC procedure to Clear the CMOS done
4.Bios i set to GFX0-GPP-IGFX-PCI :GFXO = Primary video controller on a PCI-e x16 slot
5.Yes i check all connectors.
6. Latest Bios used 1001.
I think the problem is in motherboard , BIOS ,PCIe compatibility.
Got any idea ?
Thank you.
Simon.