Good oc>

A

Arm_Pit3

New Member
geforce 6200, im OCing this in my otehr PC to se how far i can get it and stay stable.

Defaults are
375mhz core
400mhz memory
Oced to

455mhz core
480mhz memory

it went from 30C to 31C while doing nothing, im going to test it in BF2 now, how far do you think i can push it? and what do you think the MAX temp this card should get before i know its to high? I can set a therhold in the drivers for it to alert me when it gets to to high a temp, right now i have it set at 50C incase it starts getting to high while gaming. What should i set it at? whats to high?
 
WOW thats a huge inprovment in bf2, i can still play on high settings with no AA, but i never lag during explosions and i get about 30more fps average, i was getting mid 20s before but im getting 50ish, and sometimes even as high at the 80s, but thats a litel more rare
 
Your temps are just fine. Don´t worry till it's something over 70 and close to 100 degrees. By that I mean your card's temps.
 
I'd keep pushing the clocks until it starts to give errors (will fail driver testing, or artefact when gaming). Your temps are unlikely to be a problem.
 
I've OC'ed my 7800 GTX from:

Core 450
Memory 1250

to

Core 525
Memory 1390

I wanna hit 1400 solid, but it won't let me, hehe.
 
Arm_Pit
Core temp is not likely to limit your oc. But do some intense gaming and keep an eye out for visual artifacts and other od behaviour. Also keep in mind that using coolbits to automatically find the optimum frequency, sometimes pushes the card to far. Again stress the card while checking for errors.

ItlanChode said:
I've OC'ed my 7800 GTX
Click to expand...

Keep on topic.
 
ItlanChode said:
I am.. we're talking about OC'ing are we not? Am I not allowed to share my experiences?
Click to expand...

we're talking about OCing the 6200, not everything else. If you want to share your experience with other cards you can make a new thread.
 
tweaker said:
Arm_Pit
Core temp is not likely to limit your oc. But do some intense gaming and keep an eye out for visual artifacts and other od behaviour. Also keep in mind that using coolbits to automatically find the optimum frequency, sometimes pushes the card to far. Again stress the card while checking for errors.



Keep on topic.
Click to expand...
I Un OCED(I'm using riva tuner and i dont have ti set to start back up owhen windows starts) and went to play the original Day of defeat, i got what i was pretty sure were artifacts, floor was purpl and wierd. COuld i possibily have somehow damaged my card? I have limetime warrenty(BFG tech) so its nor horrible....but it was fine when it was OCed the day before...althought it was a different game.
 
You must log in or register to reply here.
Back
Top