good setup?

A

AT49ers

New Member
Rosewill CHALLENGER Black Gaming ATX Mid Tower Computer Case

Western Digital Caviar Black WD7501AALS 750GB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Hard Drive -Bare Drive

ASUS SABERTOOTH Z77 LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard

Asus GTX670-DC2T-2GD5

CORSAIR Enthusiast Series TX650 V2 650W

Intel Core i5-3570K Ivy Bridge 3.4GHz

G.SKILL Sniper 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333

Am i missing anything (i can't afford a SSD card right now)

Thanks!!!
 
All good!

I think you should spend less on the motherboard and get a Gigabyte GA-Z77X-UD3H instead and put more into the case and get a Corsair Carbide 300R instead.
 
Take your time, get everything done properly first (cable management and all), ground yourself.

To ground yourself:
You must make sure you ground yourself before doing anything which involves opening the case and doing work inside. Plug the PC into power, make sure the power is turned OFF at the wall, touch a part of the case that is bare shiny metal (a screw usually works) and then you are done. Try not to move around too much as you will build up charge again. To ground yourself again, just touch the same screw or bare metal part of the chassis you touched before. The earth is always active regardless of power switch on wall or PC.

(^ from my tech guide)
 
Thanks so much!!! you've really helped me out. if anyone else has any thing to add or change go ahead. Thanks!!!!!!!
 
Make sure to install the CPU Cooler on the motherboard before installing the motherboard into the case. I have done it without doing that, and it took me 1 hr to add the heatsink.
 
Yeah Lite On are good, as are Samsung and LG. I tend to just get the cheapest one I can, and usually that's a Samsung drive. :)
 
You must log in or register to reply here.
Back
Top