Graphics card and cases.

Aidan D

New Member
I've read a lot online that some graphics aren't compatible with some cases. How can I make sure that my graphics card will fit?
 
What case do you have? and what GPU are you considering.

Limitation is usually just if a case can fit a certain card length, as some GPU are significantly longer than others.
 
Video card width is also an issue if you grab one with a non reference design pcb and your case isn't wide enough.
 
Length wise, you should be fine. Not exactly 100% sure about the width, but you should be fine too. There looks to be enough room.
 
According to specs on both case and gpu, you should have no issue in the top pcie slot, and the lower, while less room, should also accommodate that card in length
 
I don't think you need another case, the current one should be wide enough. I just don't have the exact dimensional figures to confirm it. Since your current case you linked before (100R) has no side panel fan mountings, the width is usually not a problem.
 
Should have plenty of room. Tall tower coolers may be a tight fit though, but that isn't GPU related.
 
the dimensions of the graphics card are 10.7 x 5.1 x 1.4 inches.
the case dimensions are 16.9 x 18.5 x 7.9 inches
 
Your good. What matters is the space between the card slot on the IO panel and to the back of the hard drive cage. In other words when you put the card in, the end doesn't hit where the hard drive cage is.
 
Back
Top