Hi
i did a Hard disk test and found the following properties of with it.
Power Cycles = 1112
Start Stop Count = 1341
Power Off Retract Count = 1463
Power On hours(obvious) = 4525
could someone tell me what those above figures really means?
Start/Stop Count:This attribute indicates the count of full hard disk power on/off cycles.
Power Off Retract Count:This raw value of this attribute is a count of hard disk spindle start/stop cycles.
Power On Hours:This attribute shows a count of the number of times the drive was powered down.
Count of hours in power-on state. The raw value of this attribute shows total count of hours (or minutes, or seconds, depending on manufacturer) in power-on state. A decrease of this attribute value to the critical level (threshold) indicates a decrease of the MTBF (Mean Time Between Failures).
However, in reality, even if the MTBF value falls to zero, it does not mean that the MTBF resource is completely exhausted and the drive will not function normally.
I believe so.And does the Power Off Retract Count includes the Power Cycles?